commit: 7824e7ed9ba3e79103625b6f038033eb3f5c5320 parent 17498fa48a8c5c0ac439e59d0db12a41954d4fb0 Author: Joel Challis <git@zvecr.com> Date: Sat, 22 Jun 2024 12:14:17 +0100 Migrate `led_update_kb` implementations to DD (#23983)Diffstat:
52 files changed, 111 insertions(+), 662 deletions(-)diff --git a/keyboards/acheron/austin/austin.c b/keyboards/acheron/austin/austin.c@@ -1,18 +0,0 @@ -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(A0); - gpio_set_pin_output(A1); - gpio_set_pin_output(A2); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - gpio_write_pin(A2, led_state.num_lock); - gpio_write_pin(A0, led_state.caps_lock); - gpio_write_pin(A1, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/acheron/austin/keyboard.json b/keyboards/acheron/austin/keyboard.json@@ -33,6 +33,11 @@ "levels": 6, "breathing": true }, + "indicators": { + "caps_lock": "A0", + "num_lock": "A2", + "scroll_lock": "A1" + }, "processor": "STM32F072", "bootloader": "stm32-dfu", "layouts": {diff --git a/keyboards/cheshire/curiosity/curiosity.c b/keyboards/cheshire/curiosity/curiosity.c@@ -1,17 +0,0 @@ -#include "quantum.h" - -void matrix_init_board(void){ - gpio_set_pin_output(A8); - gpio_set_pin_output(A9); - gpio_set_pin_output(A10); -} - -bool led_update_kb(led_t led_state) { - bool runDefault = led_update_user(led_state); - if (runDefault) { - gpio_write_pin(A8, !led_state.num_lock); - gpio_write_pin(A9, !led_state.caps_lock); - gpio_write_pin(A10, !led_state.scroll_lock); - } - return runDefault; -}diff --git a/keyboards/cheshire/curiosity/keyboard.json b/keyboards/cheshire/curiosity/keyboard.json@@ -7,6 +7,12 @@ "pid": "0x0FAD", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "A9", + "num_lock": "A8", + "scroll_lock": "A10", + "on_state": 0 + }, "rgblight": { "led_count": 14, "animations": {diff --git a/keyboards/doppelganger/doppelganger.c b/keyboards/doppelganger/doppelganger.c@@ -16,21 +16,9 @@ #include "quantum.h" void keyboard_pre_init_kb(void) { - gpio_set_pin_output(C6); gpio_set_pin_output(B0); -} -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if (res) { - // gpio_write_pin sets the pin high for 1 and low for 0. - // In this example the pins are inverted, setting - // it low/0 turns it on, and high/1 turns the LED off. - // This behavior depends on whether the LED is between the pin - // and VCC or the pin and GND. - gpio_write_pin(C6, !led_state.caps_lock); - } - return res; + keyboard_pre_init_user(); } __attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) {diff --git a/keyboards/doppelganger/keyboard.json b/keyboards/doppelganger/keyboard.json@@ -8,6 +8,10 @@ "pid": "0x4447", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "C6", + "on_state": 0 + }, "matrix_pins": { "cols": ["F4", "F0", "B7", "B3", "B2", "B1", "D5", "D3", "D2"], "rows": ["E6", "F1", "C7", "F7", "F6"]diff --git a/keyboards/exclusive/e85/soldered/keyboard.json b/keyboards/exclusive/e85/soldered/keyboard.json@@ -18,6 +18,10 @@ "levels": 6, "breathing": true }, + "indicators": { + "caps_lock": "C7", + "scroll_lock": "B5" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/exclusive/e85/soldered/soldered.c b/keyboards/exclusive/e85/soldered/soldered.c@@ -1,32 +0,0 @@ -/* Copyright 2020 VashtaNerada - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(C7); - gpio_set_pin_output(B5); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - gpio_write_pin(C7, led_state.caps_lock); - gpio_write_pin(B5, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/ghs/rar/keyboard.json b/keyboards/ghs/rar/keyboard.json@@ -8,6 +8,10 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B1", + "scroll_lock": "B3" + }, "rgblight": { "led_count": 17, "animations": {diff --git a/keyboards/ghs/rar/rar.c b/keyboards/ghs/rar/rar.c@@ -1,36 +0,0 @@ -/* Copyright 2020 Gone Hacking Studio - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - // Set our LED pins as output. - gpio_set_pin_output(B1); - gpio_set_pin_output(B3); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - - if (res) { - gpio_write_pin(B1, led_state.caps_lock); - gpio_write_pin(B3, led_state.scroll_lock); - } - - return res; -}diff --git a/keyboards/gray_studio/think65/solder/keyboard.json b/keyboards/gray_studio/think65/solder/keyboard.json@@ -41,6 +41,10 @@ "nkro": false, "rgblight": true }, + "indicators": { + "caps_lock": "C7", + "on_state": 0 + }, "matrix_pins": { "cols": ["D1", "D0", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F1", "B6", "F4", "F5", "F6"], "rows": ["B0", "B1", "B2", "B3", "E6"]diff --git a/keyboards/gray_studio/think65/solder/solder.c b/keyboards/gray_studio/think65/solder/solder.c@@ -1,36 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - gpio_set_pin_output(C7); - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(C7, !led_state.caps_lock); - } - return true; -}diff --git a/keyboards/ilumkb/volcano660/keyboard.json b/keyboards/ilumkb/volcano660/keyboard.json@@ -32,6 +32,12 @@ "pin": "B7", "levels": 5 }, + "indicators": { + "caps_lock": "D2", + "num_lock": "D0", + "scroll_lock": "D1", + "on_state": 0 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": [diff --git a/keyboards/ilumkb/volcano660/volcano660.c b/keyboards/ilumkb/volcano660/volcano660.c@@ -1,34 +0,0 @@ -/* Copyright 2020 dztech - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -void matrix_init_kb(void) { - gpio_set_pin_output(D0); - gpio_set_pin_output(D1); - gpio_set_pin_output(D2); - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(D0, !led_state.num_lock); - gpio_write_pin(D2, !led_state.caps_lock); - gpio_write_pin(D1, !led_state.scroll_lock); - - } - return res; -}diff --git a/keyboards/jae/j01/j01.c b/keyboards/jae/j01/j01.c@@ -1,38 +0,0 @@ -/* Copyright Evy Dekkers - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); - gpio_set_pin_output(E6); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(E6, !led_state.caps_lock); - } - - return true; -}diff --git a/keyboards/jae/j01/keyboard.json b/keyboards/jae/j01/keyboard.json@@ -33,6 +33,10 @@ "levels": 4, "breathing": true }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, "bootmagic": { "matrix": [0, 2] },diff --git a/keyboards/kkatano/wallaby/keyboard.json b/keyboards/kkatano/wallaby/keyboard.json@@ -22,6 +22,10 @@ "resync": true } }, + "indicators": { + "caps_lock": "B6", + "scroll_lock": "B7" + }, "matrix_pins": { "cols": ["D5", "C7", "C6", "D4", "D0", "E6", "F0", "F1", "F4", "F5", "F6", "F7", "D7", "D6", "D1", "D2", "D3"], "rows": ["B5", "B4", "B3", "B2", "B1", "B0"]diff --git a/keyboards/kkatano/wallaby/wallaby.c b/keyboards/kkatano/wallaby/wallaby.c@@ -1,25 +0,0 @@ -/* Copyright 2020 Koichi Katano - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - gpio_write_pin(B6, led_state.caps_lock); - gpio_write_pin(B7, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/kkatano/yurei/keyboard.json b/keyboards/kkatano/yurei/keyboard.json@@ -22,6 +22,10 @@ "resync": true } }, + "indicators": { + "caps_lock": "B6", + "scroll_lock": "B7" + }, "matrix_pins": { "cols": ["D5", "C7", "C6", "D4", "D0", "E6", "F0", "F1", "F4", "F5", "F6", "F7", "D7", "D6", "D1", "D2", "D3"], "rows": ["B5", "B4", "B3", "B2", "B1", "B0"]diff --git a/keyboards/kkatano/yurei/yurei.c b/keyboards/kkatano/yurei/yurei.c@@ -1,25 +0,0 @@ -/* Copyright 2019 Koichi Katano - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - gpio_write_pin(B6, led_state.caps_lock); - gpio_write_pin(B7, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/marksard/leftover30/keyboard.json b/keyboards/marksard/leftover30/keyboard.json@@ -33,6 +33,10 @@ {"pin_a": "F4", "pin_b": "F5"} ] }, + "indicators": { + "caps_lock": "D1", + "num_lock": "D2" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/marksard/leftover30/leftover30.c b/keyboards/marksard/leftover30/leftover30.c@@ -1,37 +0,0 @@ -/* Copyright 2020 marksard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -void keyboard_pre_init_user(void) { - /* Set CAPSLOCK indicator pin as output */ - gpio_set_pin_output(D1); - /* Set NUMLOCK indicator pin as output */ - gpio_set_pin_output(D2); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(D2, led_state.num_lock); - gpio_write_pin(D1, led_state.caps_lock); - } - return res; -}diff --git a/keyboards/noxary/220/220.c b/keyboards/noxary/220/220.c@@ -1,34 +0,0 @@ -/* Copyright 2020 Rozakiin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - gpio_set_pin_output(C6); - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(C6, led_state.num_lock); - } - return true; -} -\ No newline at end of filediff --git a/keyboards/noxary/220/keyboard.json b/keyboards/noxary/220/keyboard.json@@ -32,6 +32,9 @@ "pin": "B7", "breathing": true }, + "indicators": { + "num_lock": "C6" + }, "processor": "atmega32u2", "bootloader": "atmel-dfu", "community_layouts": ["ortho_6x4"],diff --git a/keyboards/noxary/268_2/268_2.c b/keyboards/noxary/268_2/268_2.c@@ -1,30 +0,0 @@ -/* Copyright 2018 Rozakiin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - gpio_set_pin_output(B0); - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(B0, led_state.caps_lock); - } - return true; -}diff --git a/keyboards/noxary/268_2/keyboard.json b/keyboards/noxary/268_2/keyboard.json@@ -31,6 +31,9 @@ "backlight": { "pin": "B7" }, + "indicators": { + "caps_lock": "B0" + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["65_ansi_blocker"],diff --git a/keyboards/noxary/280/280.c b/keyboards/noxary/280/280.c@@ -1,37 +0,0 @@ -/* Copyright 2019 %YOUR_NAME% - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - gpio_set_pin_output(D5); - gpio_set_pin_output(D0); - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(D5, led_state.caps_lock); - gpio_write_pin(D0, led_state.scroll_lock); - } - return true; -} -\ No newline at end of filediff --git a/keyboards/noxary/280/keyboard.json b/keyboards/noxary/280/keyboard.json@@ -32,6 +32,10 @@ "pin": "B7", "breathing": true }, + "indicators": { + "caps_lock": "D5", + "scroll_lock": "D0" + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": {diff --git a/keyboards/ortho5by12/keyboard.json b/keyboards/ortho5by12/keyboard.json@@ -22,6 +22,10 @@ "resync": true } }, + "indicators": { + "caps_lock": "C5", + "num_lock": "C4" + }, "matrix_pins": { "cols": ["C2", "D0", "D1", "D4", "C3", "C1"], "rows": ["B5", "B1", "B2", "B3", "B4", "C0", "D5", "D6", "D7", "B0"]diff --git a/keyboards/ortho5by12/ortho5by12.c b/keyboards/ortho5by12/ortho5by12.c@@ -1,30 +0,0 @@ -/* Copyright 2019 Takuya Urakawa (dm9records.com) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -void matrix_init_kb(void) { - gpio_set_pin_output(C4); - gpio_set_pin_output(C5); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(C4, led_state.num_lock); - gpio_write_pin(C5, led_state.caps_lock); - } - return res; -}diff --git a/keyboards/percent/canoe_gen2/canoe_gen2.c b/keyboards/percent/canoe_gen2/canoe_gen2.c@@ -17,21 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(E6); - gpio_write_pin_high(E6); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(E6, !led_state.caps_lock); - } - - return true; -} - #ifdef RGB_MATRIX_ENABLE void suspend_power_down_kb(void) { rgb_matrix_set_suspend_state(true);diff --git a/keyboards/percent/canoe_gen2/keyboard.json b/keyboards/percent/canoe_gen2/keyboard.json@@ -22,6 +22,10 @@ "resync": true } }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, "ws2812": { "pin": "B7" },diff --git a/keyboards/pom_keyboards/tnln95/keyboard.json b/keyboards/pom_keyboards/tnln95/keyboard.json@@ -37,6 +37,10 @@ "levels": 10, "breathing": true }, + "indicators": { + "caps_lock": "B2", + "num_lock": "B1" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/pom_keyboards/tnln95/tnln95.c b/keyboards/pom_keyboards/tnln95/tnln95.c@@ -1,35 +0,0 @@ -/* Copyright 2020 Nguyen Minh Hoang - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(B1); - gpio_set_pin_output(B2); - /* I will add function to these later */ - // gpio_set_pin_output(B3); - // gpio_set_pin_output(E2); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(B1, led_state.num_lock); - gpio_write_pin(B2, led_state.caps_lock); - } - return res; -}diff --git a/keyboards/projectkb/alice/alice.c b/keyboards/projectkb/alice/alice.c@@ -1,20 +0,0 @@ -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(INDICATOR_PIN_0); - gpio_set_pin_output(INDICATOR_PIN_1); - gpio_set_pin_output(INDICATOR_PIN_2); - - keyboard_pre_init_user(); -} - - -bool led_update_kb(led_t led_state) { - bool runDefault = led_update_user(led_state); - if (runDefault) { - gpio_write_pin(INDICATOR_PIN_0, !led_state.num_lock); - gpio_write_pin(INDICATOR_PIN_1, !led_state.caps_lock); - gpio_write_pin(INDICATOR_PIN_2, !led_state.scroll_lock); - } - return runDefault; -}diff --git a/keyboards/projectkb/alice/rev1/config.h b/keyboards/projectkb/alice/rev1/config.h@@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 -#define INDICATOR_PIN_0 A0 -#define INDICATOR_PIN_1 A1 -#define INDICATOR_PIN_2 A2 - /* * Feature disable options * These options are also useful to firmware size reduction.diff --git a/keyboards/projectkb/alice/rev1/keyboard.json b/keyboards/projectkb/alice/rev1/keyboard.json@@ -15,6 +15,11 @@ "resync": true } }, + "indicators": { + "caps_lock": "A1", + "num_lock": "A0", + "scroll_lock": "A2" + }, "rgblight": { "led_count": 14, "animations": {diff --git a/keyboards/projectkb/alice/rev2/config.h b/keyboards/projectkb/alice/rev2/config.h@@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 -#define INDICATOR_PIN_0 A9 -#define INDICATOR_PIN_1 A8 -#define INDICATOR_PIN_2 B12 - /* * Feature disable options * These options are also useful to firmware size reduction.diff --git a/keyboards/projectkb/alice/rev2/keyboard.json b/keyboards/projectkb/alice/rev2/keyboard.json@@ -15,6 +15,11 @@ "resync": true } }, + "indicators": { + "caps_lock": "A8", + "num_lock": "A9", + "scroll_lock": "B12" + }, "rgblight": { "led_count": 14, "animations": {diff --git a/keyboards/rubi/keyboard.json b/keyboards/rubi/keyboard.json@@ -22,6 +22,9 @@ "resync": true } }, + "indicators": { + "caps_lock": "C6" + }, "matrix_pins": { "cols": ["B3", "B2", "B1", "F7"], "rows": ["F0", "F1", "F4", "F5", "F6"]diff --git a/keyboards/rubi/rubi.c b/keyboards/rubi/rubi.c@@ -63,12 +63,3 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { return process_record_user_oled(keycode, record); } - - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if (res) { - gpio_write_pin(C6, led_state.num_lock); - } - return true; -}diff --git a/keyboards/team0110/p1800fl/keyboard.json b/keyboards/team0110/p1800fl/keyboard.json@@ -34,6 +34,11 @@ "levels": 5, "breathing": true }, + "indicators": { + "caps_lock": "D5", + "num_lock": "D3", + "scroll_lock": "C6" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/team0110/p1800fl/p1800fl.c b/keyboards/team0110/p1800fl/p1800fl.c@@ -1,28 +0,0 @@ -/* Copyright 2020 marhalloweenvt - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(D3, led_state.num_lock); - gpio_write_pin(D5, led_state.caps_lock); - gpio_write_pin(C6, led_state.scroll_lock); - } - return res; -} -diff --git a/keyboards/tkc/osav2/keyboard.json b/keyboards/tkc/osav2/keyboard.json@@ -50,6 +50,11 @@ "pin": "D6", "breathing": true }, + "indicators": { + "caps_lock": "C6", + "num_lock": "C7", + "scroll_lock": "B6" + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["alice", "alice_split_bs"],diff --git a/keyboards/tkc/osav2/osav2.c b/keyboards/tkc/osav2/osav2.c@@ -1,33 +0,0 @@ -/* Copyright 2019 jrfhoutx - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -void keyboard_pre_init_kb(void) { - gpio_set_pin_output(C7); - gpio_set_pin_output(C6); - gpio_set_pin_output(B6); - - keyboard_pre_init_user(); -} - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - gpio_write_pin(C7, led_state.num_lock); - gpio_write_pin(C6, led_state.caps_lock); - gpio_write_pin(B6, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/tr60w/keyboard.json b/keyboards/tr60w/keyboard.json@@ -32,6 +32,12 @@ "backlight": { "pin": "B7" }, + "indicators": { + "caps_lock": "B2", + "num_lock": "B1", + "scroll_lock": "B3", + "on_state": 0 + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/tr60w/tr60w.c b/keyboards/tr60w/tr60w.c@@ -1,11 +0,0 @@ -#include "quantum.h" - -bool led_update_kb(led_t led_state) { - bool runDefault = led_update_user(led_state); - if (runDefault) { - gpio_write_pin(B1, !led_state.num_lock); - gpio_write_pin(B2, !led_state.caps_lock); - gpio_write_pin(B3, !led_state.scroll_lock); - } - return runDefault; -}diff --git a/keyboards/wolfmarkclub/wm1/keyboard.json b/keyboards/wolfmarkclub/wm1/keyboard.json@@ -27,6 +27,11 @@ "resync": true } }, + "indicators": { + "caps_lock": "B1", + "num_lock": "B0", + "scroll_lock": "C5" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/wolfmarkclub/wm1/wm1.c b/keyboards/wolfmarkclub/wm1/wm1.c@@ -4,19 +4,3 @@ void bootloader_jump(void) { // This board doesn't use the "standard" stm32duino bootloader, and no information is available regarding how to enter bootloader mode. All we can do here is reset. NVIC_SystemReset(); } - -void matrix_init_kb(void) { - gpio_set_pin_output(B1); // Top Indicator LED - gpio_set_pin_output(B0); // Middle Indicator LED - gpio_set_pin_output(C5); // Bottom Indicator LED - matrix_init_user(); -} - -bool led_update_kb(led_t led_state) { - if(led_update_user(led_state)) { - gpio_write_pin(B1, led_state.caps_lock); - gpio_write_pin(B0, led_state.num_lock); - gpio_write_pin(C5, led_state.scroll_lock); - } - return true; -}diff --git a/keyboards/wsk/g4m3ralpha/g4m3ralpha.c b/keyboards/wsk/g4m3ralpha/g4m3ralpha.c@@ -1,39 +0,0 @@ -/* Copyright 2020 Worldspawn <mcmancuso@gmail.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - - -void matrix_init_kb(void) { - gpio_set_pin_output(D3); - gpio_write_pin_low(D3); - gpio_set_pin_output(D2); - gpio_write_pin_low(D2); - gpio_set_pin_output(D0); - gpio_write_pin_low(D0); - - matrix_init_user(); -}; - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - gpio_write_pin(D3, led_state.num_lock); - gpio_write_pin(D0, led_state.caps_lock); - gpio_write_pin(D2, led_state.scroll_lock); - } - return res; -}diff --git a/keyboards/wsk/g4m3ralpha/keyboard.json b/keyboards/wsk/g4m3ralpha/keyboard.json@@ -8,6 +8,11 @@ "pid": "0x56D9", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D0", + "num_lock": "D3", + "scroll_lock": "D2" + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8,diff --git a/keyboards/yushakobo/navpad/navpad_prefs.c b/keyboards/yushakobo/navpad/navpad_prefs.c@@ -37,10 +37,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { return true; } -bool led_update_kb(led_t led_state) { - return led_update_user(led_state); -} - #ifdef ENCODER_ENABLE bool encoder_update_kb(uint8_t index, bool clockwise) { if (!encoder_update_user(index, clockwise)) { return false; }