commit: 24895c46f3b513483964b2ad79916f0e589dd168
parent 190e0eff23b748e9b96f0b93a0bc57b6683356b1
Author: ivan <81021475+ivndbt@users.noreply.github.com>
Date: Mon, 19 May 2025 23:15:19 +0200
Move rookiebwoy to ivndbt (#25142)
Diffstat:
25 files changed, 584 insertions(+), 578 deletions(-)
diff --git a/data/mappings/keyboard_aliases.hjson b/data/mappings/keyboard_aliases.hjson
@@ -1042,7 +1042,7 @@
"target": "kprepublic/bm68hsrgb/rev1"
},
"late9/rev1": {
- "target": "rookiebwoy/late9/rev1"
+ "target": "ivndbt/late9/rev1"
},
"latin17rgb": {
"target": "latincompass/latin17rgb"
@@ -1207,7 +1207,7 @@
"target": "spaceholdings/nebula68b"
},
"neopad/rev1": {
- "target": "rookiebwoy/neopad/rev1"
+ "target": "ivndbt/neopad/rev1"
},
"niu_mini": {
"target": "kbdfans/niu_mini"
@@ -2104,10 +2104,16 @@
"target": "rmi_kb/wete/v2"
},
"rookiebwoy/late9": {
- "target": "rookiebwoy/late9/rev1"
+ "target": "ivndbt/late9/rev1"
},
"rookiebwoy/neopad": {
- "target": "rookiebwoy/neopad/rev1"
+ "target": "ivndbt/neopad/rev1"
+ },
+ "ivndbt/late9": {
+ "target": "ivndbt/late9/rev1"
+ },
+ "ivndbt/neopad": {
+ "target": "ivndbt/neopad/rev1"
},
"rura66": {
"target": "rura66/rev1"
diff --git a/keyboards/ivndbt/late9/readme.md b/keyboards/ivndbt/late9/readme.md
@@ -0,0 +1,25 @@
+# LATE-9
+
+
+The LATE-9 is a multi-tap input keyboard based on mobile phones from the late '90s. LATE-9 is intended as a dev board with 18 buttons and an OLED screen, made by through-hole components only. With this, you can experiment QMK OLED capabilities with very little expense.
+
+
+
+* Keyboard maintainer: [ivndbt](https://github.com/ivndbt)
+* Hardware supported: ProMicro, _Elite-C (not tested)_
+* Hardware Availability: LATE-9 is open source, check the [project repository](https://github.com/ivndbt/late-9) for gerbers.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ivndbt/late9/rev1:default
+
+Flashing example for this keyboard:
+
+ make ivndbt/late9/rev1:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device.\
+After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard.
+\ No newline at end of file
diff --git a/keyboards/ivndbt/late9/rev1/config.h b/keyboards/ivndbt/late9/rev1/config.h
@@ -0,0 +1,20 @@
+/*
+Copyright 2021 ivndbt
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Oneshot interval */
+#define ONESHOT_TIMEOUT 5000
diff --git a/keyboards/ivndbt/late9/rev1/keyboard.json b/keyboards/ivndbt/late9/rev1/keyboard.json
@@ -0,0 +1,58 @@
+{
+ "keyboard_name": "LATE-9",
+ "manufacturer": "ivndbt",
+ "url": "https://github.com/ivndbt/late-9)",
+ "maintainer": "ivndbt",
+ "usb": {
+ "vid": "0x6961",
+ "pid": "0x3032",
+ "device_version": "0.1.0"
+ },
+ "tapping": {
+ "term": 400
+ },
+ "build": {
+ "debounce_type": "sym_eager_pk"
+ },
+ "matrix_pins": {
+ "cols": ["B5", "C6", "D4"],
+ "rows": ["B4", "E6", "D7", "B3", "B2", "B6"]
+ },
+ "diode_direction": "ROW2COL",
+ "features": {
+ "bootmagic": true,
+ "nkro": true,
+ "oled": true
+ },
+ "processor": "atmega32u4",
+ "bootloader": "caterina",
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"matrix": [0, 0], "x": 0, "y": 0},
+ {"matrix": [0, 1], "x": 1, "y": 0},
+ {"matrix": [0, 2], "x": 2, "y": 0},
+
+ {"matrix": [1, 0], "x": 0, "y": 1},
+ {"matrix": [1, 1], "x": 1, "y": 1},
+ {"matrix": [1, 2], "x": 2, "y": 1},
+
+ {"matrix": [2, 0], "x": 0, "y": 2},
+ {"matrix": [2, 1], "x": 1, "y": 2},
+ {"matrix": [2, 2], "x": 2, "y": 2},
+
+ {"matrix": [3, 0], "x": 0, "y": 3},
+ {"matrix": [3, 1], "x": 1, "y": 3},
+ {"matrix": [3, 2], "x": 2, "y": 3},
+
+ {"matrix": [4, 0], "x": 0, "y": 4},
+ {"matrix": [4, 1], "x": 1, "y": 4},
+ {"matrix": [4, 2], "x": 2, "y": 4},
+
+ {"matrix": [5, 0], "x": 0, "y": 5},
+ {"matrix": [5, 1], "x": 1, "y": 5},
+ {"matrix": [5, 2], "x": 2, "y": 5}
+ ]
+ }
+ }
+}
diff --git a/keyboards/ivndbt/late9/rev1/keymaps/default/keymap.c b/keyboards/ivndbt/late9/rev1/keymaps/default/keymap.c
@@ -0,0 +1,84 @@
+/* Copyright 2021 ivndbt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Layers declarations
+enum layers {
+ _BL,
+ _OL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* BL: Base Layer
+ * ,-----------------------.
+ * |MO(OP) | ↑ | BSPC |
+ * | | | |
+ * |-------+-------+-------|
+ * | <- | ↓ | -> |
+ * | | | |
+ * |-------+-------+-------|
+ * | 1 | 2 | 3 |
+ * | | | |
+ * |-------+-------+-------|
+ * | 4 | 5 | 6 |
+ * | | | |
+ * |-------+-------+-------|
+ * | 7 | 8 | 9 |
+ * | | | |
+ * |-------+-------+-------|
+ * | 0 | . | = |
+ * | | | |
+ * `-----------------------'
+ */
+ [_BL] = LAYOUT(
+ MO(1), KC_UP, KC_BSPC,
+ KC_LEFT, KC_DOWN, KC_RIGHT,
+ KC_P1, KC_P2, KC_P3,
+ KC_P4, KC_P5, KC_P6,
+ KC_P7, KC_P8, KC_P9,
+ KC_P0, KC_PDOT, KC_PEQL
+ ),
+
+/* OP: Operators Layer
+ * ,-----------------------.
+ * |MO(OP) | ↑ | BSPC |
+ * | | | |
+ * |-------+-------+-------|
+ * | <- | ↓ | -> |
+ * | | | |
+ * |-------+-------+-------|
+ * | / | * | - |
+ * | | | |
+ * |-------+-------+-------|
+ * | ( | ) | + |
+ * | | | |
+ * |-------+-------+-------|
+ * | & | % | ^ |
+ * | | | |
+ * |-------+-------+-------|
+ * | | | . | = |
+ * | | | |
+ * `-----------------------'
+ */
+ [_OL] = LAYOUT(
+ MO(1), KC_UP, KC_BSPC,
+ KC_LEFT, KC_DOWN, KC_RIGHT,
+ KC_PSLS, KC_PAST, KC_PMNS,
+ LSFT(KC_9), LSFT(KC_0), KC_PPLS,
+ LSFT(KC_7), LSFT(KC_5), LSFT(KC_6),
+ LSFT(KC_BSLS), KC_PDOT, KC_PEQL
+ ),
+};
+\ No newline at end of file
diff --git a/keyboards/ivndbt/late9/rev1/readme.md b/keyboards/ivndbt/late9/rev1/readme.md
@@ -0,0 +1,5 @@
+# LATE-9 rev1
+
+First (and final untill now) revision of the LATE-9. For in depth look please go to [project repository](https://github.com/ivndbt/late-9).
+
+
diff --git a/keyboards/ivndbt/late9/rev1/rev1.c b/keyboards/ivndbt/late9/rev1/rev1.c
@@ -0,0 +1,61 @@
+/* Copyright 2021 ivndbt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+// OLED logo
+#ifdef OLED_ENABLE
+bool oled_task_kb(void) {
+ if (!oled_task_user()) { return false; }
+ static const char PROGMEM rb_logo[] = {
+ // ivndbt 128x32px
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0x78, 0x78,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0xe1, 0xe1, 0xf8, 0xf8,
+ 0x00, 0x00, 0x80, 0x80, 0x06, 0x06, 0xff, 0xff, 0xff, 0xff, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0xcc, 0x00, 0x80, 0xc0, 0xe0,
+ 0x00, 0x00, 0x00, 0xc0, 0xe0, 0x00, 0x80, 0xc0, 0xe0, 0x80, 0x40, 0x20, 0xe0, 0xe0, 0x00, 0x00,
+ 0xc0, 0xe0, 0x20, 0x60, 0xc8, 0xfc, 0xfc, 0x00, 0x10, 0xf8, 0xfc, 0x80, 0x40, 0x60, 0xe0, 0xc0,
+ 0x00, 0x50, 0xf8, 0xfc, 0x40, 0x40, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0x20, 0x20, 0x60, 0xc0,
+ 0xe0, 0x00, 0x80, 0xc0, 0x20, 0x60, 0xe0, 0xc0, 0x80, 0x00, 0x80, 0xc0, 0xe0, 0x80, 0x40, 0xe0,
+ 0xe0, 0x80, 0x40, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0xff, 0xff, 0xff, 0xff,
+ 0x60, 0x60, 0x01, 0x01, 0x00, 0x00, 0x1f, 0x1f, 0x87, 0x87, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x1f, 0x1f, 0x08, 0x00, 0x07, 0x0f,
+ 0x1c, 0x18, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1f, 0x1f, 0x08, 0x00, 0x00, 0x1f, 0x1f, 0x08, 0x00,
+ 0x07, 0x0f, 0x1c, 0x18, 0x08, 0x1f, 0x1f, 0x08, 0x00, 0x1f, 0x1f, 0x10, 0x10, 0x10, 0x0f, 0x07,
+ 0x00, 0x00, 0x1f, 0x1f, 0x08, 0x04, 0x00, 0x18, 0x18, 0x00, 0x07, 0x0f, 0x1c, 0x18, 0x10, 0x10,
+ 0x08, 0x00, 0x07, 0x0f, 0x1c, 0x18, 0x10, 0x0f, 0x07, 0x00, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x1f,
+ 0x1f, 0x00, 0x00, 0x1f, 0x1f, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x1e, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ oled_write_raw_P(rb_logo, sizeof(rb_logo));
+ return false;
+}
+
+#endif
diff --git a/keyboards/ivndbt/neopad/readme.md b/keyboards/ivndbt/neopad/readme.md
@@ -0,0 +1,25 @@
+# Neopad
+
+Neopad is a little macropad with four switches and two rotary encoders, made by through hole components only.
+_Actually the number of switches is six, because even the encoder are allowed to click._
+
+
+
+The Neopad in the photo above is the first prototype. See the project repository for revision 1 update and KiCad files.
+
+* Keyboard maintainer: [ivndbt](https://github.com/ivndbt)
+* Hardware supported: ProMicro, _Elite-C (not tested)_
+* Project repository: [Neopad on github](https://github.com/ivndbt/neopad)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ivndbt/neopad/rev1:default
+
+Flashing example for this keyboard:
+
+ make ivndbt/neopad/rev1:default:flash
+
+When asked by the terminal, press the dedicated `RESET` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
diff --git a/keyboards/ivndbt/neopad/rev1/config.h b/keyboards/ivndbt/neopad/rev1/config.h
@@ -0,0 +1,21 @@
+/*
+Copyright 2021 ivndbt
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Onboard LEDs */
+#define LED_00 F6
+#define LED_01 F7
diff --git a/keyboards/ivndbt/neopad/rev1/keyboard.json b/keyboards/ivndbt/neopad/rev1/keyboard.json
@@ -0,0 +1,49 @@
+{
+ "keyboard_name": "neopad",
+ "manufacturer": "ivndbt",
+ "url": "https://github.com/ivndbt/neopad)",
+ "maintainer": "ivndbt",
+ "usb": {
+ "vid": "0x6961",
+ "pid": "0x3031",
+ "device_version": "0.1.0"
+ },
+ "features": {
+ "bootmagic": true,
+ "console": true,
+ "encoder": true,
+ "extrakey": true,
+ "key_lock": true,
+ "mousekey": true,
+ "nkro": false
+ },
+ "matrix_pins": {
+ "cols": ["B3", "B2", "B6"],
+ "rows": ["F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
+ "encoder": {
+ "rotary": [
+ {"pin_a": "D1", "pin_b": "D0"},
+ {"pin_a": "D4", "pin_b": "C6"}
+ ]
+ },
+ "processor": "atmega32u4",
+ "bootloader": "caterina",
+ "tapping": {
+ "toggle": 2
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"matrix": [0, 0], "x": 0, "y": 0},
+ {"matrix": [0, 1], "x": 1, "y": 0},
+ {"matrix": [0, 2], "x": 2, "y": 0},
+
+ {"matrix": [1, 0], "x": 0, "y": 1},
+ {"matrix": [1, 1], "x": 1, "y": 1},
+ {"matrix": [1, 2], "x": 2, "y": 1}
+ ]
+ }
+ }
+}
diff --git a/keyboards/ivndbt/neopad/rev1/keymaps/default/keymap.c b/keyboards/ivndbt/neopad/rev1/keymaps/default/keymap.c
@@ -0,0 +1,154 @@
+/* Copyright 2021 ivndbt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ LAYER 0 - MUSIC
+ /-----------------------------`
+ | TO(1) | stop | mute | L ENC: prev/next song
+ |---------|---------|---------|
+ | prev | play | next | R ENC: vol up/down
+ \-----------------------------'
+ */
+ [0] = LAYOUT(
+ TO(1), KC_MSTP, KC_MUTE,
+ KC_MPRV, KC_MPLY, KC_MNXT
+ ),
+
+ /*
+ LAYER 1 - MOVEMENT IN WINDOWS
+ /---------------------------------------`
+ | TO(2) | maximize | show desktop | L ENC: change desktop
+ |-------------|----------|--------------|
+ | move window | minimize | move window | R ENC: change browser tab + change explorer window
+ \---------------------------------------'
+ */
+ [1] = LAYOUT(
+ TO(2), LGUI(KC_UP), LGUI(KC_D),
+ LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RIGHT)
+ ),
+
+ /*
+ LAYER 2 - SHORTCUT
+ /------------------------------`
+ | TO(3) | esc | task man | L ENC: redo/undo
+ |---------|---------|----------|
+ | cut | copy | paste | R ENC: mouse wheel up/down
+ \------------------------------'
+ */
+ [2] = LAYOUT(
+ TO(3), KC_ESC, LCTL(LSFT(KC_ESC)),
+ LCTL(KC_X), LCTL(KC_C), LCTL(KC_V)
+ ),
+
+ /*
+ LAYER 3 - AUDACITY
+ /-----------------------------`
+ | TO(0) | REC | canc | L ENC: pan right/left
+ |---------|---------|---------|
+ | ctrl | play | pause | R ENC: mouse wheel up/down
+ \-----------------------------'
+ */
+ [3] = LAYOUT(
+ TO(0), LSFT(KC_R), KC_DEL,
+ KC_LCTL, KC_SPC, KC_P
+ ),
+
+};
+
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) { /* LEFT ENCODER */
+ switch (get_highest_layer(layer_state)) {
+ case 0:
+ // layer 0 - next song (CW) and previous (CCW)
+ if (clockwise) {
+ tap_code(KC_MNXT);
+ } else {
+ tap_code(KC_MPRV);
+ }
+ break;
+
+ case 1:
+ // layer 1 - change desktop right (CW) and left (CCW)
+ if (clockwise) {
+ tap_code16(LCTL(LGUI(KC_RIGHT)));
+ } else {
+ tap_code16(LCTL(LGUI(KC_LEFT)));
+ }
+ break;
+
+ case 2:
+ // layer 2 - redo (CW) and undo (CCW)
+ if (clockwise) {
+ tap_code16(LCTL(KC_Y));
+ } else {
+ tap_code16(LCTL(KC_Z));
+ }
+ break;
+
+ case 3:
+ // layer 3 - pan right (CW) and left (CCW)
+ if (clockwise) {
+ tap_code(KC_WH_R);
+ } else {
+ tap_code(KC_WH_L);
+ }
+ break;
+ }
+
+ } else if (index == 1) { /* RIGHT ENCODER */
+ switch (get_highest_layer(layer_state)) {
+ case 0:
+ // layer 0 - volume up (CW) and down (CCW)
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ break;
+
+ case 1:
+ // layer 1 - change browser tab (CW) and change explorer window (CCW)
+ if (clockwise) {
+ tap_code16(LCTL(KC_TAB));
+ } else {
+ tap_code16(LALT(LSFT(KC_TAB)));
+ }
+ break;
+
+ case 2:
+ // layer 2 - wheel up (CW) and down (CCW)
+ if (clockwise) {
+ tap_code(KC_WH_U);
+ } else {
+ tap_code(KC_WH_D);
+ }
+ break;
+
+ case 3:
+ // layer 3 - wheel up (CW) and down (CCW)
+ if (clockwise) {
+ tap_code(KC_WH_U);
+ } else {
+ tap_code(KC_WH_D);
+ }
+ break;
+ }
+ }
+ return true;
+}
diff --git a/keyboards/ivndbt/neopad/rev1/readme.md b/keyboards/ivndbt/neopad/rev1/readme.md
@@ -0,0 +1,5 @@
+# Neopad rev1
+
+Final revision of the Neopad macropad. For in depth look please go to [project repository](https://github.com/ivndbt/neopad).
+
+
diff --git a/keyboards/ivndbt/neopad/rev1/rev1.c b/keyboards/ivndbt/neopad/rev1/rev1.c
@@ -0,0 +1,65 @@
+/* Copyright 2021 ivndbt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+void keyboard_pre_init_kb(void) {
+ // Set LED IO as outputs
+ gpio_set_pin_output(LED_00);
+ gpio_set_pin_output(LED_01);
+ keyboard_pre_init_user();
+}
+
+bool shutdown_kb(bool jump_to_bootloader) {
+ if (!shutdown_user(jump_to_bootloader)) {
+ return false;
+ }
+ // Shutdown LEDs
+ gpio_write_pin_low(LED_00);
+ gpio_write_pin_low(LED_01);
+ return true;
+}
+
+layer_state_t layer_state_set_kb(layer_state_t state) {
+ state = layer_state_set_user(state);
+
+ // Layer LEDs act as binary indication of current layer
+ uint8_t layer = get_highest_layer(state);
+ gpio_write_pin(LED_00, layer & 0b1);
+ gpio_write_pin(LED_01, (layer >> 1) & 0b1);
+ return state;
+}
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ uint8_t led_delay_ms = 80;
+ for (int i = 0; i < 2; i++) {
+ gpio_write_pin_high(LED_00);
+ gpio_write_pin_high(LED_01);
+ wait_ms(led_delay_ms);
+ gpio_write_pin_low(LED_00);
+ gpio_write_pin_low(LED_01);
+ if (i < 1) {
+ wait_ms(led_delay_ms);
+ }
+ }
+
+ matrix_init_user();
+}
diff --git a/keyboards/rookiebwoy/late9/readme.md b/keyboards/rookiebwoy/late9/readme.md
@@ -1,25 +0,0 @@
-# LATE-9
-
-
-The LATE-9 is a multi-tap input keyboard based on mobile phones from the late '90s. LATE-9 is intended as a dev board with 18 buttons and an OLED screen, made by through-hole components only. With this, you can experiment QMK OLED capabilities with very little expense.
-
-
-
-* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy)
-* Hardware supported: ProMicro, _Elite-C (not tested)_
-* Hardware Availability: LATE-9 is open source, check the [project repository](https://github.com/rookiebwoy/late-9) for gerbers.
-
-Make example for this keyboard (after setting up your build environment):
-
- make rookiebwoy/late9/rev1:default
-
-Flashing example for this keyboard:
-
- make rookiebwoy/late9/rev1:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-
-When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device.\
-After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard.
-\ No newline at end of file
diff --git a/keyboards/rookiebwoy/late9/rev1/config.h b/keyboards/rookiebwoy/late9/rev1/config.h
@@ -1,20 +0,0 @@
-/*
-Copyright 2021 rookiebwoy
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Oneshot interval */
-#define ONESHOT_TIMEOUT 5000
diff --git a/keyboards/rookiebwoy/late9/rev1/keyboard.json b/keyboards/rookiebwoy/late9/rev1/keyboard.json
@@ -1,58 +0,0 @@
-{
- "keyboard_name": "LATE-9",
- "manufacturer": "rookiebwoy",
- "url": "https://github.com/rookiebwoy/late-9)",
- "maintainer": "rookiebwoy",
- "usb": {
- "vid": "0x6961",
- "pid": "0x3032",
- "device_version": "0.1.0"
- },
- "tapping": {
- "term": 400
- },
- "build": {
- "debounce_type": "sym_eager_pk"
- },
- "matrix_pins": {
- "cols": ["B5", "C6", "D4"],
- "rows": ["B4", "E6", "D7", "B3", "B2", "B6"]
- },
- "diode_direction": "ROW2COL",
- "features": {
- "bootmagic": true,
- "nkro": true,
- "oled": true
- },
- "processor": "atmega32u4",
- "bootloader": "caterina",
- "layouts": {
- "LAYOUT": {
- "layout": [
- {"matrix": [0, 0], "x": 0, "y": 0},
- {"matrix": [0, 1], "x": 1, "y": 0},
- {"matrix": [0, 2], "x": 2, "y": 0},
-
- {"matrix": [1, 0], "x": 0, "y": 1},
- {"matrix": [1, 1], "x": 1, "y": 1},
- {"matrix": [1, 2], "x": 2, "y": 1},
-
- {"matrix": [2, 0], "x": 0, "y": 2},
- {"matrix": [2, 1], "x": 1, "y": 2},
- {"matrix": [2, 2], "x": 2, "y": 2},
-
- {"matrix": [3, 0], "x": 0, "y": 3},
- {"matrix": [3, 1], "x": 1, "y": 3},
- {"matrix": [3, 2], "x": 2, "y": 3},
-
- {"matrix": [4, 0], "x": 0, "y": 4},
- {"matrix": [4, 1], "x": 1, "y": 4},
- {"matrix": [4, 2], "x": 2, "y": 4},
-
- {"matrix": [5, 0], "x": 0, "y": 5},
- {"matrix": [5, 1], "x": 1, "y": 5},
- {"matrix": [5, 2], "x": 2, "y": 5}
- ]
- }
- }
-}
diff --git a/keyboards/rookiebwoy/late9/rev1/keymaps/default/keymap.c b/keyboards/rookiebwoy/late9/rev1/keymaps/default/keymap.c
@@ -1,84 +0,0 @@
-/* Copyright 2021 rookiebwoy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Layers declarations
-enum layers {
- _BL,
- _OL
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* BL: Base Layer
- * ,-----------------------.
- * |MO(OP) | ↑ | BSPC |
- * | | | |
- * |-------+-------+-------|
- * | <- | ↓ | -> |
- * | | | |
- * |-------+-------+-------|
- * | 1 | 2 | 3 |
- * | | | |
- * |-------+-------+-------|
- * | 4 | 5 | 6 |
- * | | | |
- * |-------+-------+-------|
- * | 7 | 8 | 9 |
- * | | | |
- * |-------+-------+-------|
- * | 0 | . | = |
- * | | | |
- * `-----------------------'
- */
- [_BL] = LAYOUT(
- MO(1), KC_UP, KC_BSPC,
- KC_LEFT, KC_DOWN, KC_RIGHT,
- KC_P1, KC_P2, KC_P3,
- KC_P4, KC_P5, KC_P6,
- KC_P7, KC_P8, KC_P9,
- KC_P0, KC_PDOT, KC_PEQL
- ),
-
-/* OP: Operators Layer
- * ,-----------------------.
- * |MO(OP) | ↑ | BSPC |
- * | | | |
- * |-------+-------+-------|
- * | <- | ↓ | -> |
- * | | | |
- * |-------+-------+-------|
- * | / | * | - |
- * | | | |
- * |-------+-------+-------|
- * | ( | ) | + |
- * | | | |
- * |-------+-------+-------|
- * | & | % | ^ |
- * | | | |
- * |-------+-------+-------|
- * | | | . | = |
- * | | | |
- * `-----------------------'
- */
- [_OL] = LAYOUT(
- MO(1), KC_UP, KC_BSPC,
- KC_LEFT, KC_DOWN, KC_RIGHT,
- KC_PSLS, KC_PAST, KC_PMNS,
- LSFT(KC_9), LSFT(KC_0), KC_PPLS,
- LSFT(KC_7), LSFT(KC_5), LSFT(KC_6),
- LSFT(KC_BSLS), KC_PDOT, KC_PEQL
- ),
-};
-\ No newline at end of file
diff --git a/keyboards/rookiebwoy/late9/rev1/readme.md b/keyboards/rookiebwoy/late9/rev1/readme.md
@@ -1,5 +0,0 @@
-# LATE-9 rev1
-
-First (and final untill now) revision of the LATE-9. For in depth look please go to [project repository](https://github.com/rookiebwoy/late-9).
-
-
diff --git a/keyboards/rookiebwoy/late9/rev1/rev1.c b/keyboards/rookiebwoy/late9/rev1/rev1.c
@@ -1,61 +0,0 @@
-/* Copyright 2021 rookiebwoy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "quantum.h"
-
-// OLED logo
-#ifdef OLED_ENABLE
-bool oled_task_kb(void) {
- if (!oled_task_user()) { return false; }
- static const char PROGMEM rb_logo[] = {
- // rookiebwoy 128x32px
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0x00,
- 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0xe0, 0xe0,
- 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00,
- 0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0xe3, 0xe3, 0xe3, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0x1c,
- 0x1c, 0x1c, 0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0,
- 0xe0, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00,
- 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0x00,
- 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0xe0, 0xe0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x38, 0x38, 0x38, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x3f, 0x3f,
- 0x3f, 0x38, 0x38, 0x38, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x07, 0x07, 0x07,
- 0x38, 0x38, 0x38, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x07, 0x07, 0x07, 0x3f,
- 0x3f, 0x3f, 0x38, 0x38, 0x38, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x38, 0x38, 0x38, 0x3f, 0x3f,
- 0x3f, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x38, 0x38, 0x38, 0x3f, 0x3f, 0x3f, 0x38, 0x38, 0x38,
- 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x38, 0x38, 0x38, 0x3f, 0x3f, 0x3f, 0x00,
- 0x00, 0x00, 0x07, 0x07, 0x07, 0x38, 0x38, 0x38, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x0e, 0x0e, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00
- };
- oled_write_raw_P(rb_logo, sizeof(rb_logo));
- return false;
-}
-
-#endif
diff --git a/keyboards/rookiebwoy/neopad/readme.md b/keyboards/rookiebwoy/neopad/readme.md
@@ -1,25 +0,0 @@
-# Neopad
-
-Neopad is a little macropad with four switches and two rotary encoders, made by through hole components only.
-_Actually the number of switches is six, because even the encoder are allowed to click._
-
-
-
-The Neopad in the photo above is the first prototype. See the project repository for revision 1 update and KiCad files.
-
-* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy)
-* Hardware supported: ProMicro, _Elite-C (not tested)_
-* Project repository: [Neopad on github](https://github.com/rookiebwoy/neopad)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rookiebwoy/neopad/rev1:default
-
-Flashing example for this keyboard:
-
- make rookiebwoy/neopad/rev1:default:flash
-
-When asked by the terminal, press the dedicated `RESET` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device.
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
diff --git a/keyboards/rookiebwoy/neopad/rev1/config.h b/keyboards/rookiebwoy/neopad/rev1/config.h
@@ -1,21 +0,0 @@
-/*
-Copyright 2021 rookiebwoy
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Onboard LEDs */
-#define LED_00 F6
-#define LED_01 F7
diff --git a/keyboards/rookiebwoy/neopad/rev1/keyboard.json b/keyboards/rookiebwoy/neopad/rev1/keyboard.json
@@ -1,49 +0,0 @@
-{
- "keyboard_name": "neopad",
- "manufacturer": "rookiebwoy",
- "url": "https://github.com/rookiebwoy/neopad)",
- "maintainer": "rookiebwoy",
- "usb": {
- "vid": "0xFEED",
- "pid": "0x0913",
- "device_version": "0.1.0"
- },
- "features": {
- "bootmagic": true,
- "console": true,
- "encoder": true,
- "extrakey": true,
- "key_lock": true,
- "mousekey": true,
- "nkro": false
- },
- "matrix_pins": {
- "cols": ["B3", "B2", "B6"],
- "rows": ["F4", "F5"]
- },
- "diode_direction": "COL2ROW",
- "encoder": {
- "rotary": [
- {"pin_a": "D1", "pin_b": "D0"},
- {"pin_a": "D4", "pin_b": "C6"}
- ]
- },
- "processor": "atmega32u4",
- "bootloader": "caterina",
- "tapping": {
- "toggle": 2
- },
- "layouts": {
- "LAYOUT": {
- "layout": [
- {"matrix": [0, 0], "x": 0, "y": 0},
- {"matrix": [0, 1], "x": 1, "y": 0},
- {"matrix": [0, 2], "x": 2, "y": 0},
-
- {"matrix": [1, 0], "x": 0, "y": 1},
- {"matrix": [1, 1], "x": 1, "y": 1},
- {"matrix": [1, 2], "x": 2, "y": 1}
- ]
- }
- }
-}
diff --git a/keyboards/rookiebwoy/neopad/rev1/keymaps/default/keymap.c b/keyboards/rookiebwoy/neopad/rev1/keymaps/default/keymap.c
@@ -1,154 +0,0 @@
-/* Copyright 2021 rookiebwoy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /*
- LAYER 0 - MUSIC
- /-----------------------------`
- | TO(1) | stop | mute | L ENC: prev/next song
- |---------|---------|---------|
- | prev | play | next | R ENC: vol up/down
- \-----------------------------'
- */
- [0] = LAYOUT(
- TO(1), KC_MSTP, KC_MUTE,
- KC_MPRV, KC_MPLY, KC_MNXT
- ),
-
- /*
- LAYER 1 - MOVEMENT IN WINDOWS
- /---------------------------------------`
- | TO(2) | maximize | show desktop | L ENC: change desktop
- |-------------|----------|--------------|
- | move window | minimize | move window | R ENC: change browser tab + change explorer window
- \---------------------------------------'
- */
- [1] = LAYOUT(
- TO(2), LGUI(KC_UP), LGUI(KC_D),
- LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RIGHT)
- ),
-
- /*
- LAYER 2 - SHORTCUT
- /------------------------------`
- | TO(3) | esc | task man | L ENC: redo/undo
- |---------|---------|----------|
- | cut | copy | paste | R ENC: mouse wheel up/down
- \------------------------------'
- */
- [2] = LAYOUT(
- TO(3), KC_ESC, LCTL(LSFT(KC_ESC)),
- LCTL(KC_X), LCTL(KC_C), LCTL(KC_V)
- ),
-
- /*
- LAYER 3 - AUDACITY
- /-----------------------------`
- | TO(0) | REC | canc | L ENC: pan right/left
- |---------|---------|---------|
- | ctrl | play | pause | R ENC: mouse wheel up/down
- \-----------------------------'
- */
- [3] = LAYOUT(
- TO(0), LSFT(KC_R), KC_DEL,
- KC_LCTL, KC_SPC, KC_P
- ),
-
-};
-
-
-bool encoder_update_user(uint8_t index, bool clockwise) {
- if (index == 0) { /* LEFT ENCODER */
- switch (get_highest_layer(layer_state)) {
- case 0:
- // layer 0 - next song (CW) and previous (CCW)
- if (clockwise) {
- tap_code(KC_MNXT);
- } else {
- tap_code(KC_MPRV);
- }
- break;
-
- case 1:
- // layer 1 - change desktop right (CW) and left (CCW)
- if (clockwise) {
- tap_code16(LCTL(LGUI(KC_RIGHT)));
- } else {
- tap_code16(LCTL(LGUI(KC_LEFT)));
- }
- break;
-
- case 2:
- // layer 2 - redo (CW) and undo (CCW)
- if (clockwise) {
- tap_code16(LCTL(KC_Y));
- } else {
- tap_code16(LCTL(KC_Z));
- }
- break;
-
- case 3:
- // layer 3 - pan right (CW) and left (CCW)
- if (clockwise) {
- tap_code(KC_WH_R);
- } else {
- tap_code(KC_WH_L);
- }
- break;
- }
-
- } else if (index == 1) { /* RIGHT ENCODER */
- switch (get_highest_layer(layer_state)) {
- case 0:
- // layer 0 - volume up (CW) and down (CCW)
- if (clockwise) {
- tap_code(KC_VOLU);
- } else {
- tap_code(KC_VOLD);
- }
- break;
-
- case 1:
- // layer 1 - change browser tab (CW) and change explorer window (CCW)
- if (clockwise) {
- tap_code16(LCTL(KC_TAB));
- } else {
- tap_code16(LALT(LSFT(KC_TAB)));
- }
- break;
-
- case 2:
- // layer 2 - wheel up (CW) and down (CCW)
- if (clockwise) {
- tap_code(KC_WH_U);
- } else {
- tap_code(KC_WH_D);
- }
- break;
-
- case 3:
- // layer 3 - wheel up (CW) and down (CCW)
- if (clockwise) {
- tap_code(KC_WH_U);
- } else {
- tap_code(KC_WH_D);
- }
- break;
- }
- }
- return true;
-}
diff --git a/keyboards/rookiebwoy/neopad/rev1/readme.md b/keyboards/rookiebwoy/neopad/rev1/readme.md
@@ -1,5 +0,0 @@
-# Neopad rev1
-
-Final revision of the Neopad macropad. For in depth look please go to [project repository](https://github.com/rookiebwoy/neopad).
-
-
diff --git a/keyboards/rookiebwoy/neopad/rev1/rev1.c b/keyboards/rookiebwoy/neopad/rev1/rev1.c
@@ -1,65 +0,0 @@
-/* Copyright 2021 rookiebwoy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "quantum.h"
-
-void keyboard_pre_init_kb(void) {
- // Set LED IO as outputs
- gpio_set_pin_output(LED_00);
- gpio_set_pin_output(LED_01);
- keyboard_pre_init_user();
-}
-
-bool shutdown_kb(bool jump_to_bootloader) {
- if (!shutdown_user(jump_to_bootloader)) {
- return false;
- }
- // Shutdown LEDs
- gpio_write_pin_low(LED_00);
- gpio_write_pin_low(LED_01);
- return true;
-}
-
-layer_state_t layer_state_set_kb(layer_state_t state) {
- state = layer_state_set_user(state);
-
- // Layer LEDs act as binary indication of current layer
- uint8_t layer = get_highest_layer(state);
- gpio_write_pin(LED_00, layer & 0b1);
- gpio_write_pin(LED_01, (layer >> 1) & 0b1);
- return state;
-}
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- uint8_t led_delay_ms = 80;
- for (int i = 0; i < 2; i++) {
- gpio_write_pin_high(LED_00);
- gpio_write_pin_high(LED_01);
- wait_ms(led_delay_ms);
- gpio_write_pin_low(LED_00);
- gpio_write_pin_low(LED_01);
- if (i < 1) {
- wait_ms(led_delay_ms);
- }
- }
-
- matrix_init_user();
-}
