commit: 855c0e6f8b87709d3d9e529000b1fc407a8fdeea
parent d84b29f23a98d1343dd18ccaa2679b3d1b326c53
Author: Haelwenn (lanodan) Monnier <contact@hacktivis.me>
Date: Thu, 7 Mar 2019 01:54:49 +0100
Fix wrong title and syntax errors
Diffstat:
5 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/articles/All Communities Are Broken.shtml b/articles/All Communities Are Broken.shtml
@@ -4,7 +4,7 @@
<!--#include file="/templates/head.shtml" -->
<meta property="og:type" content="article"/>
<meta property="og:title" content="All Communities Are Broken"/>
- <title>Politique de CW — Cyber-habitat de lanodan</title>
+ <title>All Communities Are Broken — Cyber-habitat de lanodan</title>
<link rel="prev" href="/articles/Politique%20de%20CW">
<link rel="next" href="/articles/J%E2%80%99ai%20chang%C3%A9%20de%20cl%C3%A9%20OpenPGP">
</head>
diff --git a/coding style.shtml b/coding style.shtml
@@ -9,7 +9,7 @@
<main>
<h1>Coding Style</h1>
<p>Done from scratch to note choices done so far instead of copying and modifying after it. This just denotes my preferred coding style but the most important is for a project’s code to be consistent.</p>
- <p>And this applies to all programming languages that I use, even if I’ll use C vocabulary when applicable.</li>
+ <p>And this applies to all programming languages that I use, even if I’ll use C vocabulary when applicable.</p>
<h2>Recommended Reading</h2>
<p>The following contain good information, some of which is repeated below, some of which is contradicted below.</p>
<ul>
@@ -20,7 +20,7 @@
<h2>Choices</h2>
<ul>
<li>Tabs for indentation; space for alignment</li>
- <li>C braces break style: Allman when it’s for grouping (ie. C if-else blocks), K&R when the braces are mandatory (ie. C function definition)</li>
+ <li>C braces break style: Allman when it’s for grouping (ie. C if-else blocks), K&R when the braces are mandatory (ie. C function definition)</li>
<li>When using <code>includes</code> or similar, have them sorted (so there is deduplication) and grouped at the start of the file</li>
<li>Line-lenght:<ul>
<li>Code: 80 soft-limit, 100 hard-limit</li>
diff --git a/p-MakingAnOSHWLaptop.html b/p-MakingAnOSHWLaptop.html
@@ -1,4 +1,4 @@
-<!doctype html>
+<!DOCTYPE html>
<html lang="en">
<head>
<title>MakingAnOSHWLaptop</title>
diff --git a/projects/Open-Source Software and Hardware Laptop.shtml b/projects/Open-Source Software and Hardware Laptop.shtml
@@ -13,7 +13,7 @@
<p>Here is the parts I’ve used :</p>
<ul>
<li>Laptop case(used another one’s case)</li>
- <li>OLIMEX</ul>
+ <li>OLIMEX<ul>
<li>A20-OLinuXino-LIME2-4G</li>
<li>A20-OLinuXino-LIME2-UEXT</li>
<li>SATA-CABLE-SET (data is too short of few cm for me, used spare one)</li>
@@ -35,7 +35,7 @@
<li>An A20-OLinuXino (or other board with an allwinner CPU, I use LIME2-4G)</li>
<li>(recommended) Serial/UART adapter</li>
</ul>
- <h3>sunxi u-boot & kernel</h3>
+ <h3>sunxi u-boot & kernel</h3>
<p>I use gentoo so I only have to make u-boot, kernel, put armv7a /armhf stage3. I mainly follow olimex A20-build(found upper).</p>
<pre><code>$ export ARCH=arm
$ export CROSS_COMPILE=arm-linux-gnueabihf-</code></pre>
@@ -48,7 +48,7 @@ $ export CROSS_COMPILE=arm-linux-gnueabihf-</code></pre>
$ git clone https://github.com/linux-sunxi/linux-sunxi ; cd linux-sunxi
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/spi-sun7i.c -O drivers/spi/spi-sun7i.c
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/SPI.patch
-$ patch -p0 < SPI.patch
+$ patch -p0 < SPI.patch
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/a20_olimex_defconfig -O arch/arm/configs/a20_olimex_defconfig
$ make a20_olimex_defconfig
</code></pre>
@@ -57,12 +57,12 @@ $ make a20_olimex_defconfig
$ make modules_install</code></pre>
<quote>“The uImage file is located in arch/arm/boot/<br />
The kernel modules are located in out/lib/modules/$kernel_version”</quote> — <cite>Olimex</cite>
- <h3>Mainline u-boot & kernel</h3>
+ <h3>Mainline u-boot & kernel</h3>
<quote>“(this needs to be written)”</quote> — <cite>netstat(8)</cite>
<h3>Gentoo rootfs</h3>
<h4>Partitions</h4>
<p>Insert your storage device and use <code>dmesg</code> or <code>lsblk</code> to have the <code>/dev/sd*</code> or <code>/dev/mmcblk*</code> it will be noted as <code>/dev/sd×</code> and enter as ⮠(you may need to fix your font) for one-liners</p>
- <code># fdisk /dev/sd×</code></pre>
+ <code># fdisk /dev/sd×</code>
<ol>
<li>If you have partitions on it, you can delete them with <code>d</code> and then partition number</li>
<li>Create the /boot (I recommend using 16M or greater): <code>n⮠p⮠1⮠⮠+16M⮠</code></li>
@@ -96,7 +96,7 @@ $ make modules_install</code></pre>
<li>GnuSocial :<a href="https://loadaverage.org/tag/MakingAnOSHWLaptop">#MakingAnOSHWLaptop</a></li>
<li>Sources<ul>
<li>U-boot<ul>
- <li><a href="//git.denx.de/u-boot.git">Mainline</li>
+ <li><a href="//git.denx.de/u-boot.git">Mainline</a></li>
<li><a href="https://github.com/linux-sunxi/u-boot-sunxi.git">Sunxi</a></li>
</ul></li>
<li>Kernel<ul>
diff --git a/projets/Laptop au matériel et logiciels libre.shtml b/projets/Laptop au matériel et logiciels libre.shtml
@@ -13,7 +13,7 @@
<h2 id="parts">Pièces</h2>
<ul>
<li>Boitier d’un autre laptop</li>
- <li>OLIMEX</ul>
+ <li>OLIMEX<ul>
<li>A20-OLinuXino-LIME2-4G</li>
<li>A20-OLinuXino-LIME2-UEXT</li>
<li>SATA-CABLE-SET (le cable de donnée est trop court de quelques cm pour moi, j’en ait pris un dans mon stock)</li>
@@ -37,7 +37,7 @@
<li>An A20-OLinuXino (or other board with an allwinner CPU, I use LIME2-4G)</li>
<li>(recommended) Serial/UART adapter</li>
</ul>
- <h3>sunxi u-boot & kernel</h3>
+ <h3>sunxi u-boot & kernel</h3>
<p>I use gentoo so I only have to make u-boot, kernel, put armv7a /armhf stage3. I mainly follow olimex A20-build(found upper).</p>
<pre><code>$ export ARCH=arm
$ export CROSS_COMPILE=arm-linux-gnueabihf-</code></pre>
@@ -50,7 +50,7 @@ $ export CROSS_COMPILE=arm-linux-gnueabihf-</code></pre>
$ git clone https://github.com/linux-sunxi/linux-sunxi ; cd linux-sunxi
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/spi-sun7i.c -O drivers/spi/spi-sun7i.c
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/SPI.patch
-$ patch -p0 < SPI.patch
+$ patch -p0 < SPI.patch
$ wget https://raw.githubusercontent.com/OLIMEX/OLINUXINO/master/SOFTWARE/A20/A20-build/a20_olimex_defconfig -O arch/arm/configs/a20_olimex_defconfig
$ make a20_olimex_defconfig
</code></pre>
@@ -59,12 +59,12 @@ $ make a20_olimex_defconfig
$ make modules_install</code></pre>
<quote>“The uImage file is located in arch/arm/boot/<br />
The kernel modules are located in out/lib/modules/$kernel_version”</quote> — <cite>Olimex</cite>
- <h3>Mainline u-boot & kernel</h3>
+ <h3>Mainline u-boot & kernel</h3>
<quote>“(this needs to be written)”</quote> — <cite>netstat(8)</cite>
<h3>Gentoo rootfs</h3>
<h4>Partitions</h4>
<p>Insert your storage device and use <code>dmesg</code> or <code>lsblk</code> to have the <code>/dev/sd*</code> or <code>/dev/mmcblk*</code> it will be noted as <code>/dev/sd×</code> and enter as ⮠(you may need to fix your font) for one-liners</p>
- <code># fdisk /dev/sd×</code></pre>
+ <code># fdisk /dev/sd×</code>
<ol>
<li>If you have partitions on it, you can delete them with <code>d</code> and then partition number</li>
<li>Create the /boot (I recommend using 16M or greater): <code>n⮠p⮠1⮠⮠+16M⮠</code></li>
@@ -98,7 +98,7 @@ $ make modules_install</code></pre>
<li>GnuSocial :<a href="https://loadaverage.org/tag/MakingAnOSHWLaptop">#MakingAnOSHWLaptop</a></li>
<li>Sources<ul>
<li>U-boot<ul>
- <li><a href="//git.denx.de/u-boot.git">Mainline</li>
+ <li><a href="//git.denx.de/u-boot.git">Mainline</a></li>
<li><a href="https://github.com/linux-sunxi/u-boot-sunxi.git">Sunxi</a></li>
</ul></li>
<li>Kernel<ul>
