logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1284B)

    

  1. # FUYU HOTSWAP
  3. ![FUYU HS 7U](https://i.imgur.com/8zjDNJT.jpg)
  5. An F12 TKL Hotswappable H87-Compat Type-C PCB for the Geon F1-8K
  7. * Keyboard Maintainer: [Zykrah](https://github.com/zykrah)
  8. * Hardware Supported: Fuyu HS 7u rev1, Fuyu HS 6.25u rev1
  9. * Hardware Availability: [Github Repo](https://github.com/zykrah/fuyu), [GEON Store](https://geon.works/products/fuyu-pcb-for-f1-8k), [Cafege](https://cafege.com.au/products/fuyu-8k-pcb)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make zykrah/fuyu_hs:default
  15. Flashing example for this keyboard:
  17.     make zykrah/fuyu_hs:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available