logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1285B)

    

  1. # Let's Split v3
  3. ![Let's Split v3](https://i.imgur.com/ksZ64dKh.jpg)
  5. Version 3 of the Let's Split keyboard, originally designed by Wootapatoot. This version features identical PCBs for both halves powered by an RP2040 controller. Each half features full hot swap capability as well as in-switch addressable LEDs and 39 1mm underglow LEDs.
  7. * Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
  8. * Hardware Supported: Let's Split v3 PCB
  9. * Hardware Availability: [1upkeyboards](https://1upkeyboards.com/shop/keyboard-kits/diy-40-kits/lets-split-v3/#choose-your-kit)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make ziptyze/lets_split_v3:default
  15. Flashing example for this keyboard:
  17.     make ziptyze/lets_split_v3:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 2 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix, the top left key, and plug in the keyboard
  26. * **BOOTSEL button**: Hold down the reset button on the PCB, and plug in the keyboard