logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1217B)

    

  1. # qwertyqop hotswap 60% PCB
  3. ![qwertyqop hotswap 60% PCB](https://i.imgur.com/OJXzZSEh.jpg)
  5. A generic hotswap 60% PCB with cutouts akin to h60 and 2 positions for JST port.
  7. * Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix)
  8. * Hardware Supported: Qwertyqop QQ60 Hotswap PCB Rev1
  9. * Hardware Availability: https://qwertyqop.com/products/60-pcb-1
  11. Make example for this keyboard (after setting up your build environment):
  13.     make zeix/qwertyqop60hs:default
  15. Flashing example for this keyboard:
  17.     make zeix/qwertyqop60hs:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Press the 'USB_BOOT' button and plug in keyboard or briefly short the `RESET` and `GND` pads on the SWD header twice
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available