logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1314B)

    

  1. # navpad 1.0 with Helix (Right hand side)
  3. ![10_helix_r](https://imgur.com/ehTI37h.jpg)
  5. Navpad connected with helix keyboard (Right Side)
  7. * Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
  8. * Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro
  9. * Hardware Availability: https://shop.yushakobo.jp/products/navpad-10
  11. Make example for this keyboard (after setting up your build environment):
  12.     
  13.     make yushakobo/navpad/10_helix_r:default
  15. Flashing examples for this keyboard...
  17. Helix side:
  18.     
  19.     make yushakobo/navpad/10_helix_r:default:avrdude-split-right
  20.     
  21. Navpad side:
  23.     make yushakobo/navpad/10_helix_r:default:avrdude-split-left
  25. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  27. ## Bootloader
  29. Enter the bootloader in 3 ways:
  31. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  32. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  33. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available