logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1304B)

    

  1. # YMD75 / MT84
  3. 75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
  5. This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.
  7. * Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
  8. * Hardware Supported: rev1 (ATmega32a)
  9. * Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
  11. Make example for this keyboard (after setting up your build environment):
  13.     make ymdk/ymd75/rev1:default
  15. Flashing example for this keyboard:
  17.     make ymdk/ymd75/rev1:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard.
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available