logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1290B)

    

  1. # YMDK YMD62 ISO
  3. A 60% PCB supporting the ISO layout, with hotswap sockets, backlit keys and underglow.
  5. * Keyboard Maintainer: [Richard Dawe](https://github.com/richdawe)
  6. * Hardware Supported: YMD62 PCB
  7. * Hardware Availability: [YMDK](https://ymdkey.com/products/ymd62-iso-rgb-hot-swap-pcb-fully-programmable-support-via-vial)
  9. Make example for this keyboard (after setting up your build environment):
  11.     make ymdk/ymd62:default
  13. Flashing example for this keyboard:
  15.     make ymdk/ymd62:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Double-tap the reset button on the back of the PCB
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  27. Note: The device does not reconnect automatically after the QMK firmware has been flashed.
  28. Wait for the USB device to disappear after writing firmware, then unplug and re-plug it.