logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (2343B)

    

  1. # Idobao x YMDK ID75
  3. ![Idobao x YMDK ID75](https://i.imgur.com/bhVfzrzh.jpg)
  5. A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs.
  7. * Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
  8. * Hardware Supported: [Idobao x YMDK ID75](https://www.aliexpress.com/item/3256804537842097.html). **This is not the same PCB as `idobao/id75` or `ymdk/ymd75`.**
  9.   This keyboard has had multiple PCB revisions, some of which may not work with the firmware in this repository. **Check your PCB before flashing.**
  10.   * `f103`: (Geehy APM32F103CBT6, uf2boot)
  11.   * `rp2040`: (RP2040, rp2040)
  12. * Hardware Availability: [YMDK](https://ymdkey.com/products/id75-75-keys-ortholinear-layout-qmk-anodized-aluminum-case-plate-hot-swappable-hot-swap-type-c-pcb-mechanical-keyboard-kit), [AliExpress (YMDK Store)](https://www.aliexpress.com/item/2255800125183974.html), [Amazon](https://www.amazon.com/Ortholinear-Anodized-Aluminum-hot-swappable-Mechanical/dp/B07ZQ8CD88)
  14. Make example for this keyboard (after setting up your build environment):
  16.     make ymdk/id75/f103:default
  17.     make ymdk/id75/rp2040:default
  19. Flashing example for this keyboard:
  21.     make ymdk/id75/f103:default:flash
  22.     make ymdk/id75/rp2040:default:flash
  24. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  26. ## Bootloader
  28. Enter the bootloader in 3 ways:
  30. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  31. * **Physical reset button**: Press the button on the back of the PCB twice in quick succession.
  32. * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner.
  34. After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
  35. - `f103`: The volume name is `MT.KEY`.
  36. - `rp2040`: The volume name is `RPI-RP2`.