logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1136B)

    

  1. # Just60
  3. Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
  5. To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
  7. Backlight LEDs and Bluetooth are not working yet.
  9. * Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer)
  10. * Hardware Supported: Just60 (atmega32u4)
  11. * Hardware Availability: https://item.taobao.com/item.htm?id=564176654249
  13. Make example for this keyboard (after setting up your build environment):
  15.     make ydkb/just60:default
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).