logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1738B)

    

  1. # WiredIn Protagonist
  3. * Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
  4. * Hardware Supported: proprietary PCB using STM32F411 microcontroller;
  5. * Hardware Availability: the Protagonist entered Group Buy in february 2024 and as of april 2025 there were no more public sales.
  7. The Protagonist is a 60% keyboard designed by WiredIn and PCB designed by [Gondolindrim](http://github.com/Gondolindrim), who is also the firwmare maintainer.
  9. ## How to flash
  11. ### Enter bootloader
  13. The DFU state in the bootloader can be accessed in 3 ways:
  15. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (escape in the default keymap) and plug in the keyboard;
  16. * **Physical reset button**: press the button on the back of the PCB and hold it for 5 seconds;
  17. * **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1.
  19. ### How to compile and flash
  21. The Protagonist has two PCB versions: PRO-S (solderable) and PRO-H (hotswap). After checking what PCB you own and setting up your build environment, you can compile the default keymap by using one of the options below.
  23.     make wiredin/protagonist/<version>:default
  25. Where `<version>` can be `pro_s` or `pro_h`. And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
  27.     make wiredin/protagonist/<version>:default:flash
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).