logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1109B)

    

  1. # wilba.tech WT65-D
  3. WT65-D is a keyboard PCB supporting 65% layout. [More info at wilba.tech](https://wilba.tech/)
  5. * Keyboard Maintainer: [wilba](https://github.com/wilba)
  6. * Hardware Supported: wilba.tech WT65-D
  7. * Hardware Availability: [wilba.tech](https://wilba.tech/)
  9. Make example for this keyboard (after setting up your build environment):
  11.     make wilba_tech/wt65_d:default
  13. Flashing example for this keyboard:
  15.     make wilba_tech/wt65_d:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available