logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1357B)

    

  1. # Ampersand
  3. ![Ampersand](https://i.imgur.com/jbr7Bld.png)
  5. Ampersand is a gummyworm mounted 13.5u keyboard with minimum 40s support needed.
  6. Its frosted polycarbonate case and blasted brass weight will pair well with most keysets, with greater compatibility than most 40s.
  8. * Keyboard Maintainer: [roarmstrong](https://github.com/roarmstrong)
  9. * Hardware Supported: Ampersand custom PCB, using Atmega32u4
  10. * Hardware Availability: [Coffee Break Keyboards](https://www.cbkbd.com/product/ampersand), [Keeb Supply](https://keeb.supply/products/ampersand)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make whitefacemountain/ampersand:default
  16. Flashing example for this keyboard:
  18.     make whitefacemountain/ampersand:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button labelled SW1 on the back of the PCB
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available