logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1339B)

    

  1. # RP2040-Keyboard-3
  3. ![waveshare/rp2040_keyboard_3](https://i.imgur.com/HYoHwVk.jpeg)
  5. RP2040-Keyboard-3 is a high-performance, cost-effective three-key keyboard development board designed by Waveshare.
  6. It features programmable custom key functions and RGB lighting effects.
  8. * Keyboard Maintainer: [zvecr](https://github.com/zvecr)
  9. * Hardware Supported: <https://www.waveshare.com/wiki/RP2040-Keyboard-3>
  10. * Hardware Availability: <https://thepihut.com/products/rp2040-ctrl-c-v-shortcut-keyboard-plus>
  12. Make example for this keyboard (after setting up your build environment):
  14.     make waveshare/rp2040_keyboard_3:default
  16. Flashing example for this keyboard:
  18.     make waveshare/rp2040_keyboard_3:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
  27. * **Physical reset button**: Press and hold the `BOOT` button, then briefly press the `RESET` button on the back of the PCB
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available