logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1212B)

    

  1. # UMBRA
  3. ![UMBRA](https://i.imgur.com/2d94i6H.jpg)
  5. A multi-mount 60% keyboard with PCB choice featuring popular layouts, underglow, and rotary option.
  7. * Keyboard Maintainer: [IV Works](https://www.iv-works.com/)
  8. * Hardware Supported: [UMBRA](https://www.iv-works.com/i)
  9. * Hardware Availability: [Shop](https://iv-works.com/product-category/umbra/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make umbra/hotswap:default
  15. Flashing example for this keyboard:
  17.     make umbra/hotswap:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. How to enter bootloader (DFU):
  24. * PCB will arrive flashed. With USB plugged in press Fn+Esc to enter DFU. Flash the firmware and replug the USB cable to fresh boot the PCB.
  26. * If that method fails please locate the RESET header on the back of the PCB just right of the MCU. Short the 2 plated holes for 2 seconds to enter DFU. Flash the firmware and replug the USB cable to fresh boot the PCB.