logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1241B)

    

  1. # Kobold
  3. ![Kobold](https://i.imgur.com/R8nDodO.jpg)
  5. 4x4 macropad running QMK, in the same form factor as a bm16s. Non-standard Choc key spacing.
  7. North-facing RGB, SPI NOR Flash, voltage and current measurement, direct pin matrix, reset to bootloader by holding top 4 keys.
  9. * Keyboard Maintainer: [tzarc](https://github.com/tzarc)
  10. * Hardware Supported: Kobold, r1
  11. * Hardware Availability: [KiCad files](https://github.com/tzarc/keyboards/tree/main/Kobold)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make tzarc/kobold/r1:default
  17. Flashing example for this keyboard:
  19.     make tzarc/kobold/r1:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard
  28. * **Physical reset button**: Simultaneously press the top four keys, or press the physical button on the back marked 'D'.
  29. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available