logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1125B)

    

  1. # Djinn
  3. ![Djinn](https://i.imgur.com/ArSjkv8.jpg)
  5. The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.
  7. Keyboard Maintainer: [tzarc](https://github.com/tzarc)  
  8. Hardware Supported: Djinn: rev1, rev2  
  9. Hardware Availability: [Open-source](https://github.com/tzarc/djinn)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make tzarc/djinn/rev2:default
  15. Flashing example for this keyboard:
  17.     make tzarc/djinn/rev2:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the top-left key and plug in the keyboard.
  26. * **Physical reset button**: Briefly press the button on the back of the PCB.
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.