qmk_firmware

readme.md (1398B)

# gok TypeK QMK Firmware Folder
![TK](https://i.imgur.com/0ZEbEZt.jpg)
## Introduction
This is the QMK Firmware repository for the Type K, the tented ergo by Gok. The TypeK went through GB on August, 2023. It is supported by a proprietary PCB ecosystem.
## How to flash
### Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard;
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
* **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1.
### How to compile and flash
After setting up your build environment, you can compile the Iron 165R2 default keymap by using one of the options below.
    make typek:default
And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
    make typek:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).