logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1850B)

    

  1. # Lotus 58 Glow
  3. ![lotus58](https://i.imgur.com/WWgpp0Sh.jpeg)
  5. * Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.
  7. * Keyboard Maintainer: [TweetyDaBird](https://github.com/TweetyDaBird)
  8. * Hardware Supported: *Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible*
  9. * Hardware Availability: [Lectronz Store](https://lectronz.com/stores/tweetys-wild-thinking)
  10. * Hardware Design: [GitHub](https://github.com/TweetyDaBird/Lotus58)
  13. #### This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader. 
  16. * promicro - This uses the default Caterina bootloader.
  17. * elite_c - This uses the Atmel-DFU bootloader.
  18. * nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro).
  21. Make example for this keyboard (after setting up your build environment):
  23.     make tweetydabird/lotus58/promicro:default
  25. Flashing example for this keyboard:
  27.     make tweetydabird/lotus58/elite_c:default:flash
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  31. ## Bootloader
  33. Enter the bootloader in 3 ways:
  35. * **Bootmagic reset**: Hold down the top outer key for each hand as it is plugged in
  36. * **Physical reset**: Briefly short the marked pads on PCB
  37. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if mapped (not in default keymap)