logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1694B)

    

  1. # Model-B
  3. A 75% keyboard based on the RP2040.
  5. * Keyboard Maintainer: [Brian Hill](https://github.com/TrojanPinata)
  6. * Hardware Supported: [GitHub](https://github.com/TrojanPinata/Model-B)
  8. ## Revisions
  10. At the current moment there is only one variant of the Model-B, the rev-0 (aka the prototype board). Any others are clones and may not have the exact firmware requirements.
  12. ## Building and Flashing
  14. Make example for this keyboard (after setting up your build environment):
  16.     make trojan_pinata/model-b/rev0:default
  17.     
  18. Flashing example for this keyboard:
  20.     make trojan_pinata/model-b/rev0:default:flash
  22. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  24. ## Bootloader
  26. Enter the bootloader in 3 ways:
  28. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  29. * **Physical reset button**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
  30. * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Esc key.
  32. After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.