logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1222B)

    

  1. # E8ghtyNeo
  3. ![E8ghtyNeo](https://imgur.com/YXYfqzZ.png)
  5. A TKL keyboard PCB compatible with Neo80. Supports Neo80 keyboard like an out-of-the-box PCB without any modification.
  7. * Keyboard Maintainer: [Trnthsn](https://github.com/trnthsn)
  8. * Hardware Supported: STM32, E8ghtyNeo, Neo80
  9. * Hardware Availability: [ThanhSon.Mech](https://www.facebook.com/ThanhSon.mech)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make trnthsn/e8ghtyneo/stm32f072:default
  15. Flashing example for this keyboard:
  17.     make trnthsn/e8ghtyneo/stm32f072:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available