logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1192B)

    

  1. # Adalyn
  3. ![Adalyn](https://i.imgur.com/3mGQlh2.jpg)
  5. *A cool QAZ-Alice hybrid designed by [Marv](https://github.com/MarvFPV/Adalyn) with a PCB by [tominabox1](https://github.com/tominabox1)*
  6. * Keyboard Maintainer: [tominabox1](https://github.com/tominabox1)
  7. * Hardware Supported: Adalyn PCB, atmega32u4
  8. * Hardware Availability: Open source on @tominabox1 GitHub
  10. Make example for this keyboard (after setting up your build environment):
  11.     make tominabox1/adalyn:default
  12. Flashing example for this keyboard:
  13.     make tominabox1/adalyn:default:flash
  14. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  15. ## Bootloader
  16. Enter the bootloader in 3 ways:
  17. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  18. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  19. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available