logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (991B)

    

  1. # Additional info
  3. ## Matrix
  5. You probably tried or will try to configure the keymapping to your liking. To make it easier configuring your layouts, photo of keyboards matrix will help.
  7. ![TMO50 matrix](https://i.imgur.com/ud7RB8d.png)
  9. ## Pinout
  11. Most of the pinout can be found in *config.h* but there's here's a table of all the used pins for TMO50 (including indicator LED pins)
  13. | Pin | Assigned to |
  14. |---|---|
  15. | D5 | Row 0 |
  16. | D3 | Row 1 |
  17. | D2 | Row 2 |
  18. | D0 | Row 3 |
  19. |    |       |
  20. | D1 | Col 0 |
  21. | D4 | Col 1 |
  22. | F0 | Col 2 |
  23. | F1 | Col 3 |
  24. | F4 | Col 4 |
  25. | F5 | Col 5 |
  26. | F6 | Col 6 |
  27. | F7 | Col 7 |
  28. | D6 | Col 8 |
  29. | D7 | Col 9 |
  30. | B4 | Col 10 |
  31. | B5 | Col 11 |
  32. | B6 | Col 12 |
  33. | C6 | Col 13 |
  34. |    |        |
  35. | B7 | Backlight |
  36. | C7 | RGB LEDs |
  37. | B0 | LED 4 (L4) |
  38. | B1 | LED 3 (L3) |
  39. | B2 | LED 2 (L2) |
  40. | B3 | LED 1 (L1) |
  42. ## Indicator LEDs
  44. Their size is 2×3×4mm. The THT hole without a circle on the pcb is VCC(+) and the other one is connect to their corresponding pin.