logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1360B)

    

  1. # grandiceps
  3. ![grandiceps](https://i.imgur.com/FMtsboVl.jpg)
  5. ARM split keyboard with RGB underglow and encoders.
  7. * Keyboard Maintainer: [vattern](https://github.com/vattern)
  8. * Hardware Supported: f411 blackpill
  9. * Hardware Availability: [grandiceps](https://github.com/vattern/grandiceps)
  11. There are two versions of the Grandiceps. Please use the appropriate firmware for your board.
  13. * Revision 2 has I2C eeprom and support for a Pimoroni trackball.
  15. Make example for this keyboard (after setting up your build environment):
  17.     make tkw/grandiceps:default
  18.     make tkw/grandiceps/rev2:default
  20. Flashing example for this keyboard:
  22.     make tkw/grandiceps:default:flash
  23.     make tkw/grandiceps/rev2:default:flash
  25. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  27. ## Bootloader
  29. Enter the bootloader in 3 ways:
  31. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  32. * **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB.
  33. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available