logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1341B)

    

  1. # qoolee
  3. ![qoolee](https://github.com/takashicompany/qoolee/raw/master/images/qmk.jpg?raw=true)
  5. QooLee is a keyboard with a 30% layout with ISO Enter.
  6. It can also be equipped with a rotary encoder.
  7. It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs.
  8. VIA (Remap) firmware is also available.
  10. * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
  11. * Hardware Supported: PCB, Pro Micro
  12. * Hardware Availability: https://github.com/takashicompany/qoolee
  14. Make example for this keyboard (after setting up your build environment):
  16.     make takashicomoany/qoolee:default
  18. Flashing example for this keyboard:
  20.     make takashicompany/qoolee:default:flash
  22. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  24. ## Bootloader
  26. Enter the bootloader in 3 ways:
  28. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  29. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  30. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available