logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1074B)

    

  1. # Nascent
  3. 65% PCB with leaf-spring mounting tabs designed for the Nascent keyboard.
  5. * Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
  6. * Hardware Supported: [store.studiokestra.ca](https://store.studiokestra.ca/)
  7. * Hardware Availability: Group-Buy (Q1 2022)
  9. Make example for this keyboard (after setting up your build environment):
  11.     make studiokestra/nascent:default
  13. Flashing example for this keyboard:
  15.     make studiokestra/nascent:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootload Sequence
  21. There are 3 ways to put the board in bootloader mode:
  23. - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
  24. - While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
  25. - With the default layout, toggle Layer 1 and press the `R` key.