logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1089B)

    

  1. # Soulstone
  3. ![Soulstone](https://i.imgur.com/aQBsgZ9h.jpg)
  5. A hotswap PCB inspired by an elegant [prime_e](https://www.primekb.com/products/prime_e-rev-2-pcb),
  6. 45% ergo keyboard. It is compatible with `rev2` (RGB and non-RGB) which makes it
  7. fit to any `rev2` compatible case.
  9. * Keyboard Maintainer: [Strech](https://github.com/Strech)
  10. * Hardware Supported: Soulstone
  11. * Hardware Availability: Coming soon
  13. Make example for this keyboard (after setting up your build environment):
  15.     make strech/soulstone:default
  17. Flashing example for this keyboard:
  19.     make strech/soulstone:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and
  22. the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
  23. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  25. ## Bootloader
  27. Enter the bootloader using one of the following methods:
  29. * Tap the Reset switch mounted on the PCB
  30. * Hold down the key at (0,0) in the matrix (usually the top left key or `Escape`) and plug in the keyboard