logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1183B)

    

  1. # SteelSeries Prime +
  3. ![Prime+](https://i.imgur.com/QhNHmwxh.png)
  5. This firmware does not support the dedicated lift off sensor.
  7. Erase with an stlink and flash this [uf2boot bootloader](https://github.com/daskygit/uf2-prime-plus), this is a a one way procedure voiding any warranty so be sure you don't want to use the original manufacturers firmware.
  9. * Keyboard Maintainer: [Dasky](https://github.com/daskygit)
  10. * Hardware Supported: SteelSeries Prime+
  11. * Hardware Availability: https://steelseries.com/gaming-mice/prime-plus
  13. Make example for this keyboard (after setting up your build environment):
  15.     make steelseries/prime_plus:default
  17. Flashing example for this keyboard:
  19.     make steelseries/prime_plus:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 2 ways:
  27. * **Bootmagic reset**: Hold down left mouse button and plug in.
  28. * **Bootloader entry**: Hold the underneath button while plugging in.