logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1728B)

    

  1. # Splitty
  3. ![Splitty](http://ni.fr.eu.org/~nico/qmk/splitty/splitty_for_scale.jpg)
  5. ![Bottom view](http://ni.fr.eu.org/~nico/qmk/splitty/bottom_view.jpg)
  7. ![Side view](http://ni.fr.eu.org/~nico/qmk/splitty/stack_view.jpg)
  9. ![PCB](http://ni.fr.eu.org/~nico/qmk/splitty/splitty.png)
  11. This is a split ergonomic keyboard initially based on the Ergodox layout
  12. without the thumb cluster. It uses 32 keys per sides with Cherry MX
  13. compatibles switches, thirty 1u and two vertical 1.5u caps.
  15. The controller is integrated in order to make the keyboard as slim as possible.
  17. It connects to the computer using a micro-B USB. Both sides are connected
  18. together also using micro-B USB. Any connection mistake should not break
  19. anything and the keyboard supports hot plugging.
  21. * Keyboard Maintainer: [Nicolas Schodet](https://github.com/schodet)
  22. * Hardware Supported: Splitty
  23. * Hardware Availability: [Splitty](https://git.ni.fr.eu.org/splitty.git/about/)
  25. Make example for this keyboard (after setting up your build environment):
  27.     make splitty:default
  29. Flashing example for this keyboard:
  31.     make splitty:default:flash
  33. Handedness should be programmed in EEPROM once, you can use these commands to
  34. flash the firmware and the EEPROM:
  36.     make splitty:default:dfu-split-left
  37.     make splitty:default:dfu-split-right
  39. If you do not have a reset keycode in your keymap, press the reset button or
  40. short the corresponding contacts if not populated to enter bootloader.
  42. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
  43. and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
  44. for more information. Brand new to QMK? Start with our
  45. [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).