logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1152B)

    

  1. // Copyright 2024 QMK
  2. // SPDX-License-Identifier: GPL-2.0-or-later
  4. #pragma once
  6. #define SERIAL_USART_FULL_DUPLEX      // Enable full duplex operation mode.
  7. #define SERIAL_USART_PIN_SWAP         // Swap TX and RX pins if keyboard is master halve.
  8. #define SERIAL_USART_DRIVER      SD1  // USART driver of TX pin. default: SD1
  9. #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
  10. #define SERIAL_USART_TX_PIN      A9
  11. #define SERIAL_USART_RX_PIN      A10
  13. #define WS2812_PWM_CHANNEL     4
  14. #define WS2812_PWM_PAL_MODE    1
  15. #define WS2812_PWM_DMA_STREAM  STM32_DMA1_STREAM2     // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  16. #define WS2812_PWM_DMA_CHANNEL 2                      // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  17. #define WS2812_PWM_DMAMUX_ID   STM32_DMAMUX1_TIM2_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.