logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (3305B)

    

  1. /*
  2. Copyright 2020 Yiancar
  4. This program is free software: you can redistribute it and/or modify
  5. it under the terms of the GNU General Public License as published by
  6. the Free Software Foundation, either version 2 of the License, or
  7. (at your option) any later version.
  9. This program is distributed in the hope that it will be useful,
  10. but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12. GNU General Public License for more details.
  14. You should have received a copy of the GNU General Public License
  15. along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16. */
  18. #pragma once
  20. #define WS2812_PWM_DRIVER PWMD3  // default: PWMD2
  21. #define WS2812_PWM_CHANNEL 2  // default: 2
  22. #define WS2812_PWM_PAL_MODE 2  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
  23. #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  24. #define WS2812_PWM_DMA_CHANNEL 3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  26. /* Backlight options */
  28. #define RGB_BACKLIGHT_ENABLED 1
  30. #define RGB_BACKLIGHT_NEBULA68
  32. // they aren't really used if RGB_BACKLIGHT_NEBULA65 defined
  33. #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
  34. #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
  35. #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
  36. #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
  37. #define RGB_BACKLIGHT_USE_ISO_ENTER 0
  38. #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
  40. // disable backlight when USB suspended (PC sleep/hibernate/shutdown)
  41. #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
  43. // disable backlight after timeout in minutes, 0 = no timeout
  44. #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
  46. // the default brightness
  47. #define RGB_BACKLIGHT_BRIGHTNESS 255
  49. // the default effect (RGB test)
  50. #define RGB_BACKLIGHT_EFFECT 6
  52. // the default effect speed (0-3)
  53. #define RGB_BACKLIGHT_EFFECT_SPEED 0
  55. // the default color1 and color2
  56. #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
  57. #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
  59. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
  60. #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA
  61. #define IS31FL3733_LED_COUNT 128
  63. // These define which keys in the matrix are alphas/mods
  64. // Used for backlight effects so colors are different for
  65. // alphas vs. mods
  66. // Each value is for a row, bit 0 is column 0
  67. // Alpha=0 Mod=1
  68. #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
  69. #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001
  70. #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0110000000000001
  71. #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
  72. #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111111000000111
  74. #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
  75. #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
  76. #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
  77. #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
  79. // Backlight config starts after VIA's EEPROM usage,
  80. // dynamic keymaps start after this.
  81. #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32