logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1455B)

    

  1. /* Copyright 2023 Brian Low
  2.  *
  3.  * This program is free software: you can redistribute it and/or modify
  4.  * it under the terms of the GNU General Public License as published by
  5.  * the Free Software Foundation, either version 2 of the License, or
  6.  * (at your option) any later version.
  7.  *
  8.  * This program is distributed in the hope that it will be useful,
  9.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11.  * GNU General Public License for more details.
  12.  *
  13.  * You should have received a copy of the GNU General Public License
  14.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15.  */
  16. #pragma once
  18. // Enabling this option changes the startup behavior to listen for an
  19. // active USB communication to delegate which part is master and which
  20. // is slave. With this option enabled and theres’s USB communication,
  21. // then that half assumes it is the master, otherwise it assumes it
  22. // is the slave.
  23. //
  24. // I've found this helps with some ProMicros where the slave does not boot
  25. #define SPLIT_USB_DETECT
  27. #define RGB_MATRIX_SLEEP     // turn off effects when suspended
  28. #define SPLIT_TRANSPORT_MIRROR             // If LED_MATRIX_KEYPRESSES or LED_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
  29. #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 100  // limits maximum brightness of LEDs (max 255). Higher may cause the controller to crash.