qmk_firmware

readme.md (1387B)

# GK61 PRO 48
![GK61 PRO](https://i.imgur.com/DTetyVLh.jpg)
## The PCB features:
* QMK & VIA compatibility
* RGB Matrix backlight
* The space bar position switch can be interchanged with encoder module.
The following is the QMK Firmware for the Destop 60% keylayout -  designed in Dongguan Jizhi Electronic Technology Co., Ltd
* Keyboard Maintainer: [NaturalZh](https://github.com/NaturalZh)
* Hardware Supported: DestopPCB for Skyloong keylayout 60%, STM32F103C8T6
* Hardware Availability: http://www.skyloong.com.cn  https://skyloong.vip
Make example for this keyboard (after setting up your build environment):
    make skyloong/gk61/pro_48:default
Flashing example for this keyboard:
    make skyloong/gk61/pro_48:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available