logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1296B)

    

  1. # DT40
  3. ![DT40](https://i.imgur.com/3QemSZ0h.jpg)
  5. ## The PCB features:
  6. * QMK & VIA compatibility
  7. * RGB Matrix backlight
  8. * Thin body & Simple keys
  11. The following is the QMK Firmware for the Destop 40% keylayout -  designed in Dongguan Jizhi Electronic Technology Co., Ltd
  12. * Keyboard Maintainer: [JZ-Skyloong](https://github.com/JZ-Skyloong)
  13. * Hardware Supported: DestopPCB for Skyloong keylayout 40%, STM32F103C8T6
  14. * Hardware Availability: http://www.skyloong.com.cn
  16. Make example for this keyboard (after setting up your build environment):
  18.     make skyloong/dt40:default
  20. Flashing example for this keyboard:
  22.     make skyloong/dt40:default:flash
  24. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  26. ## Bootloader
  28. Enter the bootloader in 3 ways:
  30. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  31. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  32. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available