logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1197B)

    

  1. # mino_plus
  3. ![mino_plus](https://i.imgur.com/vZJ6kaNh.jpg)
  5. A 65% keyboard, inspried by tetrominos.
  7. * Keyboard Maintainer: [ShandonCodes](https://github.com/ShandonCodes)
  8. * Hardware Supported: Mino Plus PCB
  9. * Hardware Availability: https://store.shandon.codes/mino-plus/
  11. Make example for this keyboard (after setting up your build environment):
  13.     make shandoncodes/mino_plus/soldered:default
  14.     make shandoncodes/mino_plus/hotswap:default
  16. Flashing example for this keyboard:
  18.     make shandoncodes/mino_plus/soldered:default:flash
  19.     make shandoncodes/mino_plus/hotswap:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Briefly press the button on the back of the PCB
  29. * **Keycode in layout**: Press the key mapped to `FN` + `R` if it is available.