logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1127B)

    

  1. # Sha
  3. ![Sha](https://i.imgur.com/4yuQwRXh.jpg)
  5. Sha is a 50 key ortholinear keyboard, powered by a Waveshare RP2040-Zero or Waveshare RP2040-Matrix.
  7. * Keyboard Maintainer: [Steven Karrmann](https://github.com/skarrmann)
  8. * Hardware Supported: Sha PCBs with either RP2040-Zero or RP2040-Matrix
  9. * Hardware Availability: [Sha GitHub repository](https://github.com/skarrmann/sha)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make sha:default
  15. Flashing example for this keyboard:
  17.     make sha:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard.
  26. * **Physical reset button**: Doublet-tap the EN/RESET button on the MCU board.
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.