logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1303B)

    

  1. # ScottoWing (PCB Edition)
  3. ![ScottoWing](https://i.imgur.com/ckaYMAx.jpeg)
  5. The ScottoWing (PCB Edition) is a 3x5 (34-keys) or 3x6 (40-keys) split monoblock ergonomic column-staggered keyboard.
  7. * Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
  8. * Hardware Supported: RP2040 Pro Micro, nice!nano
  9. * Hardware Availability: [ScottoKeebs](https://scottokeebs.com), [Amazon](https://amazon.com), [AliExpress](https://aliexpress.com)
  11. # Compiling
  13. Make example for this keyboard (after setting up your build environment):
  15.     make scottokeebs/scottowing:default
  17. Flashing example for this keyboard:
  19.     make scottokeebs/scottowing:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. # Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  29. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available