logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1161B)

    

  1. # VCL65 solder
  3. ![VCL65 solder](https://i.imgur.com/ofSfOTfh.jpg)
  5. A 65% keyboard PCB made and sold under the name "VCL65 Solder" by SawnsProjects with Hoaq in Private Discord GB. 
  7. * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq)
  8. * Hardware Supported: Lotus65 lite, VCL65, 65% traymount case
  9. * Hardware Availability: Private Discord GB
  11. Make example for this keyboard (after setting up your build environment):
  13.     make sawnsprojects/vcl65/solder:default
  15. ## Bootloader
  17. Enter the bootloader in 3 ways:
  19. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  20. * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead
  21. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  23. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).