logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1490B)

    

  1. # Plaque80
  3. ![Plaque80](https://i.imgur.com/kgRcHTlh.png)
  5.  A TKL keyboard sold in ParamountKeeb. Atmega32u4 soldered PCB. Sold under the name "Plaque80" with Plaque80 keyboard case. This PCB can compatible with Plaque80 keyboard case and several TKL boards like Geonworks Frog/F1-8x; KFE-CE; TGR Jane; Cloudline; Singa Jaguar; Amber80, among others.
  7.  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
  9. * Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) [ParamountKeeb](https://paramountkeeb.com/)
  10. * Hardware Supported: Plaque80 
  11. * Hardware Availability: [ParamountKeeb](https://paramountkeeb.com/)
  13. Make examples for this keyboard (after setting up your build environment):
  15.     make sawnsprojects/plaque80:default
  17. ## Bootloader
  19. Enter the bootloader in 3 ways:
  21. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  22. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  23. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  25. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).