logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1177B)

    

  1. # Krush65 Hotswap
  3. ![Krush65](https://imgur.com/56ZvWUmh.jpg)
  5. A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). 
  7. * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
  8. * Hardware Supported: Krush65
  9. * Hardware Availability: [mechkey.store](https://mechkey.store/products/krush-65-hotswap-pcb)
  11. ## Bootloader
  13. Enter the bootloader in 3 ways:
  15. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  16. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  17. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  19. Make example for this keyboard (after setting up your build environment):
  21.     make sawnsprojects/krush/krush65/hotswap:default
  23. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).