logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1287B)

    

  1. # Amber80 solder
  3. A TKL keyboard sold in several variants. 
  5. 1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.
  7.  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
  9. * Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
  10. * Hardware Supported: Amber80 
  11. * Hardware Availability: Comming Soon
  13. Make examples for this keyboard (after setting up your build environment):
  15.     make sawnsprojects/amber80/solder:default
  17. ## Bootloader
  19. Enter the bootloader in 3 ways:
  21. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  22. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  23. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  25. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).