logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1267B)

    

  1. # Starry FRL
  3. ![Starry FRL](https://i.imgur.com/eRYlEe7.jpeg)
  5.  This firmware support for both Solder and Hotswap PCB of Starry FRL
  7.  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `uf2` appropriate for your board.
  9. * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) 
  10. * Hardware Supported: Starry FRL 
  11. * Hardware Availability: [Waifu.works Discord](https://discord.gg/waifuworks)
  13. Make examples for this keyboard (after setting up your build environment):
  15.     make salane/starryfrl:default
  17. Flashing example for this keyboard:
  19.     make salane/starryfrl:default:flash
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Press the key `BOOT` in the back of PCB and plug in keyboard
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).