logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1260B)

    

  1. # NCR80 ALPS SKFL
  3. ![NCR80 ALPS SKFL](https://i.imgur.com/X964J2P.jpeg)
  5.  PCB Replace for NCR80 with ALPS SKFL switch.
  7.  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
  9. * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) 
  10. * Hardware Supported: NCR80 
  11. * Hardware Availability: [Github](https://github.com/MaiTheSan/NCR80-ALPS-SKFL)
  13. Make examples for this keyboard (after setting up your build environment):
  15.     make salane/ncr80alpsskfl:default
  17. Flashing example for this keyboard:
  19.     make salane/ncr80alpsskfl:default:flash
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: short 2 pin in the back of pcb and plug the usb in
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).