logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1262B)

    

  1. # Royal Kludge RK G68
  3. ![Royal Kludge RK G68](https://imgur.com/UnOJPZrh.jpg)
  5. * Keyboard Maintainer: [Thomaz Peres](https://github.com/Thomaz-Peres)
  6. * Hardware Supported: Royal Kludge RK G68, RGB version
  7. * Hardware Availability: [RKGaming.com](http://en.rkgaming.com/product/13/), [Amazon.com](https://www.amazon.com/RK-ROYAL-KLUDGE-Bluetooth-Mechanical/dp/B08JCRMZX9/)
  9. After setting up your build environment, you can compile the  default keymap by using:
  11.     make rkg68:default
  13. Flashing example for this keyboard:
  15.     make rkg68:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  25. - **Keycode in layout**: Press the key `FN` and `Left CTRL`.
  27. ## Layout
  29. - 65% Standard ANSI layout
  31. ![Imgur](https://i.imgur.com/l7ka1gkh.png)