qmk_firmware

keymap.c (6081B)

#include QMK_KEYBOARD_H
#include "keymap_japanese.h"
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
  _BASE = 0,
  _LOWER,
  _RAISE,
  _ADJUST,
};
enum custom_keycodes {
  RGBRST = SAFE_RANGE,
  LOWER,
  RAISE,
  KANJI,
};
enum tapdances{
  TD_CODO = 0,
 };
// Layer Mode aliases
#define KC_MLAD  MO(_ADJUST)
// Base layer mod tap
#define KC_SLSF  LSFT_T(KC_SLSH)
#define KC_Z_CT  LCTL_T(KC_Z)
#define KC_X_AL  LALT_T(KC_X)
#define KC_C_GU  LGUI_T(KC_C)
#define KC_ENSF  LSFT_T(KC_ENT)
#define KC_M_CT  LCTL_T(KC_M)
// Lower layer mod tap
#define KC_F6SF  LSFT_T(KC_F6)
#define KC_BSSF  LSFT_T(KC_BSLS)
#define KC_11CT  LCTL_T(KC_F11)
#define KC_12AL  LALT_T(KC_F12)
// Layer tap
#define KC_BSLO  LT(_LOWER, KC_BSPC)
#define KC_SPRA  LT(_RAISE, KC_SPC)
// Tap dance
#define KC_CODO  TD(TD_CODO)
tap_dance_action_t tap_dance_actions[] = {
  [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT),
 };
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_BASE] = LAYOUT(
  //,-------------------------------------------------------------------------------------------------------------.
          KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,  KC_BSLO,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       KC_SLSF,     KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,  KC_ENSF,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       KC_Z_CT,  KC_X_AL,  KC_C_GU,     KC_V,     KC_B,  KC_SPRA,     KC_N,  KC_M_CT,  KC_CODO
  //`---------+---------+---------+---------+---------+---------+---------+---------+---------'
  ),
  [_LOWER] = LAYOUT(
  //,-------------------------------------------------------------------------------------------------------------.
         KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,  _______,  KC_MINS,   KC_EQL,   JP_YEN,  KC_LBRC,  KC_RBRC,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       _______,    KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10,  XXXXXXX,  XXXXXXX,  KC_SCLN,  KC_QUOT,  KC_BSSF,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       KC_11CT,  KC_12AL,   KC_ESC,   KC_TAB,    KANJI,  KC_MLAD,  XXXXXXX,  KC_COMM,   KC_DOT
  //`---------+---------+---------+---------+---------+---------+---------+---------+---------'
  ),
  [_RAISE] = LAYOUT(
  //,-------------------------------------------------------------------------------------------------------------.
          KC_1,     KC_2,     KC_3,     KC_4,     KC_5,  _______,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_LEFT,  KC_DOWN,    KC_UP,  KC_RGHT,  KC_LSFT,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       KC_LCTL,  KC_LALT,  KC_LGUI,  XXXXXXX,  XXXXXXX,  _______,  XXXXXXX,  KC_SLSH,  JP_BSLS
  //`---------+---------+---------+---------+---------+---------+---------+---------+---------'
  ),
  [_ADJUST] = LAYOUT(
  //,-------------------------------------------------------------------------------------------------------------.
         QK_BOOT, RGBRST,  AG_NORM,  AG_SWAP,  XXXXXXX,  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       _______,  UG_TOGG,  UG_HUEU,  UG_SATU,  UG_VALU,  XXXXXXX,  KC_MS_L,  KC_MS_D,  KC_MS_U,  KC_MS_R,  XXXXXXX,
  //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
       UG_NEXT,  UG_HUED,  UG_SATD,  UG_VALD,  XXXXXXX,  _______,  KC_BTN1,  KC_BTN2,  XXXXXXX
  //`---------+---------+---------+---------+---------+---------+---------+---------+---------'
  )
};
uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case KC_BSLO:
      return TAPPING_LAYER_TERM;
    case KC_SPRA:
      return TAPPING_LAYER_TERM;
    default:
      return TAPPING_TERM;
  }
}
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  bool result = false;
  switch (keycode) {
    case KANJI:
      if (record->event.pressed) {
        if (keymap_config.swap_lalt_lgui == false) {
          register_code(KC_LNG2);
        } else {
          SEND_STRING(SS_LALT("`"));
        }
      } else {
        unregister_code(KC_LNG2);
      }
      break;
    #ifdef RGBLIGHT_ENABLE
      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
      case QK_UNDERGLOW_MODE_NEXT:
          if (record->event.pressed) {
            rgblight_mode(RGB_current_mode);
            rgblight_step();
            RGB_current_mode = rgblight_config.mode;
          }
        break;
      case RGBRST:
          if (record->event.pressed) {
            eeconfig_update_rgblight_default();
            rgblight_enable();
            RGB_current_mode = rgblight_config.mode;
          }
        break;
    #endif
    default:
      result = true;
      break;
  }
  return result;
}
void keyboard_post_init_user(void) {
  #ifdef RGBLIGHT_ENABLE
    RGB_current_mode = rgblight_config.mode;
  #endif
}