logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1018B)

    

  1. # Rati(o)60
  3. A 60% hot swap PCB for both tray mount and o-ring mount
  5. * Keyboard Maintainer: [4pplet](https://github.com/4pplet)
  6. * Hardware Supported: Rati(o)60 Rev A
  8. Make example for this keyboard (after setting up your build environment):
  10.     make rationalist/ratio60_hotswap/rev_a:default
  12. Flashing example for this keyboard:
  14.     make rationalist/ratio60_hotswap/rev_a:default:flash
  16. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  18. ## Bootloader
  20. Enter the bootloader in 3 ways:
  22. * **Bootmagic reset**: Hold down Escape and plug in the keyboard
  23. * **Physical reset button**: Press and hold the button on the back of the PCB or short the reset header for about 3 seconds then release the buttom/remove the short
  24. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available