logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1185B)

    

  1. # QVEX Lynepad 2
  3. ![QVEX Lynepad 2.1](https://i.imgur.com/eDvVaE4h.jpeg)
  5. *Macropad with 11 keys, thumbwheel, and a rotary 4-way switch*
  7. * Keyboard Maintainer: [QVEX Tech](https://github.com/QVEX-Tech) ([seflm](https://github.com/seflm))
  8. * Hardware Supported: QVEX Lynepad
  9. * Hardware Availability: [QVEX Lynepad on Tindie](https://www.tindie.com/products/qvex_tech/lynepad-21-hot-swap-macropad-w-joystick/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make qvex/lynepad:default
  15. Flashing example for this keyboard:
  17.     make qvex/lynepad:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ### Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard
  26. * **Physical reset button**: Briefly press the reset button on the back of the Lynepad using SIM tool (rev.2.0 or newer) 
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available