logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1172B)

    

  1. # qck75
  3. [qck75](https://i.imgur.com/exdD8Hgh.jpeg)
  5. This keyboard is a keyboard made for self use
  6. 75% layout with extra keys for macro with led and knob
  8. * Keyboard Maintainer: [Andrian](https://github.com/PoringH)
  9. * Hardware Supported: This project uses STM32F072R8Tx for the mcu on the pcb
  10. * Hardware Availability: https://github.com/PoringH/QCK75-XT
  12. Make example for this keyboard (after setting up your build environment):
  14.     make qck75/v1:default
  16. Flashing example for this keyboard:
  18.     make qck75/v1:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available