logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1177B)

    

  1. # proteus67
  3. ![proteus67](https://i.imgur.com/mYhl7Jah.png)
  5. 67 key ortholinear layout with rotary encoder.
  7. * Keyboard Maintainer: [James Gzowski](https://github.com/gzowski)
  8. * Hardware Supported: Elite-Pi or equivilent RP2040 controller with additional I/O along bottom.
  9. * Build Guide: [Proteus67](https://github.com/gzowski/Proteus67)
  11. Make example for this keyboard (after setting up your build environment):
  12. 	
  13.     make proteus67:default
  15. Flashing example for this keyboard:
  17.     make proteus67:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Briefly press the button on the back of the PCB, if using a RP2040 press repeatidly to enter boot mode.
  25. * **Hold down boot loader button on MCU** Hold down the boot loader button on the MCU while plugging in the keyboard